English |
19
Application tool
Material
Application
profiles with small dimen-
sions
AIZ 32 BSPB
Starlock
32 × 50 mm bi-
metal plunge cut
saw blade for hard-
wood
Hardwood, laminated
boards
Splinter-free separation and plunge cuts in coated boards
or hardwood thanks to round sawing edge (Curved-Tec),
Japan toothing specially suited for hardwood;
Example: Installation of skylights, recess for plug sockets
AIZ 32 AT/
AIZ 32 AIT
Starlock
32 × 40 mm
carbide plunge cut
saw blade for metal
Hard ferrous metals, ex-
tremely abrasive materi-
als, fibreglass, plaster-
board, cement-bonded
fibreboards, hardened
nails and screws
Sawing extremely abrasive materials or hard ferrous
metals; long service life thanks to BOSCH carbide techno-
logy;
Example: Cutting of kitchen front covers, simple sawing
through hardened nails and stainless steel
AIZ 32 APT/
AIZ 32 APIT
Starlock
32 × 40 mm
carbide plunge cut
saw blade for
multi-material
Hard ferrous sheet metal,
epoxy, plasterboard,
GFRP, CFRP, cement
fibreboard
Splinter-free separating cuts and plunge cuts in sheet
metal thanks to round sawing edge (Curved-Tec); long ser-
vice life thanks to BOSCH carbide technology;
Example: Sawing through sheet metal, cutting through
screws in window frames
AYZ 53 BPB
Starlock
53 × 40 mm
plunge cut saw
blade for multi-
material
Gypsum boards, chip-
boards, sandwich mater-
ial, wood
Optimised for plunge saw cuts with a subsequent longer
separation cut; the Dual-Tec shape ensures a clean and
complete cut both in the corners and during a longer sep-
aration cut;
Example: Plug socket recesses in gypsum boards or
wooden walls
AII 65 APB
Starlock
65 × 40 mm bi-
metal plunge cut
saw blade for wood
and metal
Softwood, hardwood,
veneered boards, plastic-
coated boards, non-
hardened nails and bolts
Splinter-free separation and plunge cuts thanks to round
sawing edge (Curved-Tec) in coated boards or hardwood;
Example: Shortening door frames, recesses in laminate
flooring for a tray or built-in furniture, cutting through non-
hardened nails and bolts when flush with the surface
ACZ 85 EB
Starlock
85 mm diameter
bimetal segment
saw blade for wood
and metal
Wooden materials,
plastic, soft and non-fer-
rous metals
Separation and plunge saw cuts;
also for sawing close to the edge in difficult-to-access
areas;
Example: Shortening already installed skirting boards or
door frames, plunge cuts when adapting floor panels
ACZ 100 SWB
Starlock
100 mm diameter
bimetal segment
serrated knife for
multi-material
Insulation material, insula-
tion boards, floor panels,
impact sound insulation
boards, cardboard, car-
pets, rubber, leather
Precise cutting of soft materials;
example: Cutting insulation boards to size, cutting pro-
truding insulation material to length so that it is flush with
the surface
ACZ 105 ET
Starlock
105 mm diameter
carbide segment
saw blade for
multi-material
Fibre cement boards, tile
joints, brick, fibreglass-re-
inforced plastics, lamin-
ate
Separation and plunge saw cuts; also for sawing close to
the edge in difficult-to-access areas; long service life
thanks to BOSCH carbide technology;
Example: Shortening already installed skirting boards or
door frames, milling cable ducts in brick, quick and low-
dust cutting out of tile joints, cutting fibreglass boards to
size for fittings, adjustment work in laminate; available
from mid-2021
Bosch Power Tools
1 609 92A 5V6 | (20.08.2020)
