-6-
Article number
. . . . . . . . . . . .
3601K61010
Number of laser points . . . . . . . . . . . . . . .
2 Beams, 1 primary rotating beam and 1
squaring beam orthogonal to the rotating beam
Orthogonality:
Rotating and Squaring beams will be within
90 d/- 10 arc seconds.
Dithering Settings . . . . . . . .20 deg. +/- 10%
45 deg. +/- 10%
90 deg. +/- 10%
120 deg. +/- 10%
Rotation Speeds
Three Discrete Speeds : . . . .120, 450, and
8
00 rpm +/- 15%
At low temperature (-5C to –10C), the high
rotation speed spec. is 650 RPM +/- 15%.
Accuracy
Level & Plumb:
Minimum Factory
Accuracy . . . . . . . . . . . . . . . ±0.167mm/m
(±0.002004in/ft)
Typical Accuracy . . . . . . up to ±1/
8
”@ 100ft
(±
3
mm at
3
0m)
Leveling Range . . . . . . . . . . . . . .Up to +/- 6°
Level Settling Time
Horizontal: . . . . . . . . . . . . . <-11s (full range)
<-7s (bump)
Vertical: . . . . . . . . . . . . . . . . . . . . . . . .<-25s
Leveling
Repeatability . . . . . . . .
≤
6mm @
3
0m max.
Regulatory Compliance . . . . . . . . . . .Class II
Laser Beam Power . . . . .6
3
5nm, 1mW max.
Dot mode
pulse rate . . . . . . . . . . . .62.5 Hz @
3
1.25 %
duty cycle
IP Protection . . . . . . . . . . . . . . . . . . .IP 54
Beeper . . . . . . . . .
3
.0kHz, 65 dB @ 1m(typ).
Power . . . . . . . . . . . . .4 ‘D’ alkaline batteries
Weight . . . . . . . . . . . . . . . . . . . . . . . . 5.5lb
(2.5 kg)
(including 4 `D’ alkaline batteries)
Operating
temperature range . . . . . . . . .-10°C to +50°C
Storage
temperature range. . . . . . . . .-20°C to +70°C
Battery Life . . . . . . . . . . . . . . . . 40 hrs (min)
Remote Control with Laser
Receiver-detector
Laser Sensitivity
6
3
5nm +/- 10%, .0.
8
mw (min) @ 4Hz (min)
–
3
0Hz (max) pulse rate.
RF remote
control range . . .Up to 50m radius from laser
Laser receiver-
detector range .Up to 50m radius from laser
Detection angle . . . . . . . . . +/- 40 degrees X
The numbering of the product features shown
refers to the illustration of the measuring tool
on page
3
.
1
Plumb Beam Aperture
2
Battery lid locking screw
3
Laser Aperture
4
Power Switch
5
Laser Controls
6
Battery Compartment
7
5/
8
-11 tripod mount
8
Calibration Controls
9
Manual Grade Controls
10
Handle
Keypad Controls
11
LED
12
Dot / line or Dither / Scan mode
13
Laser on/off
14
Spin Mode / Speed Select
15
Left and Right Direction Controls
16
Calibrate Axis 2
17
Lower Calibration Beam
18
Calibration Axis 1
19
Raise Calibration Beam
Other Features
20
RCR2 Remote Control/ Receiver
Detector
21
Bracket for RCR2*
22
Wall Mount*
23
Target/ Measurement Plate with Stand*
24
Laser Viewing Glasses*
25
Case
26
Tripod* (not shown)
Receiver / Detector
27
Laser Target
28
LCD Display
29
Detector Controls
30
Detector Power On/Off
31
Detector Coarse/Fine Select /
Detector Beeper On/Off
*The accessories illustrated or described are
not included as standard delivery.
Features
Technical Data
