English |
13
has come to a standstill.
In this manner you can avoid
kickback and can place down the power tool securely.
u
Always wait until the power tool has come to a com-
plete stop before placing it down.
The application tool
can jam and cause you to lose control of the power tool.
u
Use only undamaged saw blades that are in perfect
condition.
Bent or dull saw blades can break, negatively
influence the cut, or lead to kickback.
u
Do not brake the saw blade to a stop by applying side
pressure after switching off.
The saw blade can be dam-
aged, break or cause kickback.
u
Ensure that the material is securely clamped. Do not
support the workpiece using your hands or feet. Do
not touch any objects or the floor with the saw while it
is running.
There is a risk of kickback.
u
Use suitable detectors to determine if there are hid-
den supply lines or contact the local utility company
for assistance.
Contact with electric cables can cause
fire and electric shock. Damaging gas lines can lead to ex-
plosion. Breaking water pipes causes property damage.
u
In case of damage and improper use of the battery, va-
pours may be emitted. The battery can set alight or ex-
plode.
Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
u
Do not open the battery.
There is a risk of short-circuit-
ing.
u
The battery can be damaged by pointed objects such
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
u
Only use the battery with products from the manufac-
turer.
This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture.
There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is suitable for sawing wood, plastic, metal
and building materials on a firm surface. It is suitable for
straight and curved cuts. The saw blade recommendations
are to be observed.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Saw blade
A)
(2)
Base plate
(3)
Locking sleeve for saw blade
(4)
Battery
A)
(5)
Battery release button
A)
(6)
Lock-off button for on/off switch
(7)
On/off switch
(8)
Worklight
(9)
Temperature monitoring/overload protection
indicator
(10)
Battery charge indicator
(11)
Handle (insulated gripping surface)
(12)
Saw blade receptacle
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Reciprocating saw
GSA 12V-14
Article number
3 601 F4L 9..
Rated voltage
V=
12
No-load stroke rate n
0
min
−1
0–3000
Tool holder
SDS
Stroke
mm
14.5
Max. cutting depth
– In wood
mm
65
– In steel (unalloyed)
mm
8
– Pipe diameter
mm
50
Weight according to
EPTA-Procedure 01:2014
kg
1.2−1.4
A)
Permitted ambient temperature
– During charging
°C
0 to +45
– During operation
B)
and
during storage
°C
−20 to +50
Recommended batteries
GBA 12V…
Recommended chargers
GAL 12...
GAX 18...
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
Technical data determined using the battery that comes with the
product.
Noise/vibration information
Noise emission values determined according to
EN 62841-2-11
.
Bosch Power Tools
1 609 92A 4T8 | (26.03.2019)
