Programme
en
13
No. Food
Cookware
Weight setting
Add liquid
Shelf
posi-
tion
Information
06
Pot-roasted beef
E.g. prime rib,
shoulder, rump or mar-
inated beef roast
Roasting dish with
lid
Weight of meat
Almost cover
the meat with
liquid
2
Do not sear the meat
beforehand
07
Beef roulades
Stuffed with vegetables
or meat
Roasting dish with
lid
Total weight of all
of the stuffed roul-
ades
Add stock,
water or an-
other liquid
to the dish
until the beef
olives are al-
most covered
2
Do not sear the meat
beforehand
08
Leg of lamb, well-
done
Boned, seasoned
Roasting dish with
lid
Weight of meat
Cover the
bottom of the
roasting dish,
and add up
to 250 g ve-
getables if re-
quired
2
Do not sear the meat
beforehand
09
Joint of veal, lean
E.g. tenderloin or eye
Roasting dish with
lid
Weight of meat
Cover the
bottom of the
roasting dish,
and add up
to 250 g ve-
getables if re-
quired
2
Do not sear the meat
beforehand
10
Pork neck joint
Boned, seasoned
Roasting dish with
glass lid
Weight of meat
Cover the
bottom of the
roasting dish,
and add up
to 250 g ve-
getables if re-
quired
2
Do not sear the meat
beforehand
10.3 Preparing food for the programme
Use fresh and, ideally, chilled food.
1.
Weigh the food.
The weight of the food is required in order to cor-
rectly set the programme.
2.
Add the food to the cookware.
3.
Place the cookware onto the wire rack.
Always place the cookware into the cooking com-
partment while it is cold.
10.4 Setting a programme
The appliance selects the optimal type of heating, tem-
perature and cooking time. All you need to do is set
the weight.
Notes
¡
You can set the weight only in the intended area.
¡
After the programme starts, you can no longer
change the programme and the weight.
1.
Use the function selector to set
Programme
.
2.
Use the temperature selector to set
Programme
.
3.
Use the or button to set the required pro-
gramme.
4.
Press the button.
5.
Use the or button to set the weight of your
food. Always set the next higher weight.
‒
The display shows the calculated cooking time.
The cooking time cannot be changed.
‒
For some programmes, the button can be
used to delay the end.
→
"Setting the end time", Page 11
‒
To change the programme, press the button.
a
After a few seconds, the programme starts and the
cooking time counts down.
a
If the programme has ended, an audible signal
sounds and the display shows the cooking time as
zero.
6.
When the programme ends:
‒
Press any button to end the audible signal pre-
maturely.
‒
To set a cooking time for further cooking, press
the button. The appliance continues to heat
using the programme settings.
‒
When your food is ready, switch off the appli-
ance.
