20
Basic settings
Your appliance has various basic settings, which are preset at
the factory. You can change the basic settings as you require.
If you want to cancel all the changes, you can restore the
factory settings.
The appliance must be switched off.
1.
If required, press the
%
button to switch off the appliance.
2.
Press the
°
button.
“Basic settings” and “Select language” appear in the display.
3.
Turn the rotary selector until the required basic setting
appears.
4.
Press the
X
button to switch to the bottom line.
5.
Turn the rotary selector to change the setting.
6.
Press the
°
button to exit Basic settings.
The change is saved.
You can change the following basic settings:
Automatic switch-off
If you do not change the settings on your appliance for several
hours, the automatic switch-off function will be activated.
"Automatic switch-off" appears in the display.
Press any button to deactivate the automatic switch-off. You
can now make new settings.
Basic setting
Function
Possible settings
Select language
Changes the display language
30 different languages
Signal duration
Sets the length of the audible signal at the end of an opera-
tion
short / medium / long
Button tone
Switches on/off the audible signal that sounds when you
press a button
off / on
Display brightness
Changes display brightness
day / medium / night
Contrast
Changes display contrast
7 levels -
ÛÛÛÚÛÛÛ
+
Clock display
Display the clock when the appliance is off
off / on
Continue operation after the door
is closed.
The operation does not go back to the beginning when the
appliance door is opened
off / automatic
Adjust individually
Set programme cooking results to be generally higher or
lower
7 levels -
ÛÛÛÚÛÛÛ
+
Water hardness
Sets the water hardness range for the descaling indicator
softened / 1
soft / 2
medium /
3
hard / 4
very hard
Steam cooking heat signal
Audible signal at the end of the heating up phase during
steaming
off / on
Display button description
Switches the button description display on or off when the
appliance is switched on
shown / hidden
Restore factory settings
Restore the appliance to the factory settings:
■
all changes to the basic settings are deleted
■
Memory is cleared
■
Automatic calibration is carried out again
do not restore / restore
Summary of Contents for HBC38D753
Page 1: ... en Instruction manual Combination steam oven HBC38D753 ...
Page 2: ......