Bosch HBF134BS0K, Instruction Manual

en

    Installation and connection

6

5

Installation and connection

Installation and connection

This appliance is only intended to be fully fitted in a 

kitchen. Observe the special installation instructions.

'R QRW LQVWDOO WKH DSSOLDQFH EHKLQG D GHFRUDWLYH GRRU RU WKH GRRU
RIDNLWFKHQXQLWDVWKLVPD\FDXVHWKHDSSOLDQFHWRRYHUKHDW

Electrical connection

Only licensed specialists may connect the appliance.It 

is important that you comply with the requirements of 

your electricity supplier.
Any damage arising from the appliance being 

connected incorrectly will invalidate the warranty.

Caution!

If the supply cord is damaged, it must be replaced by 

the manufacturer, its service agent or similarly qualified 

persons in order to avoid a hazard.

■

The appliance must be disconnected from the power 

supply whenever installation work is being carried 

out.

■

The appliance fulfils the requirements of protection 

class I and may only be connected to an earthed 

socket.

■

The mains power cable must be at least type 

H05 V V-F 3G, 1.5 mm².

:

Warning – Danger of death! 

There is a risk of electric shock if you touch live 

components.

■

Always make sure your hands are dry when you 

touch or hold the mains plug.

■

Only pull out the mains cable by taking hold of the 

plug and removing the plug; never pull it out by the 

mains cable itself, as this could damage it.

■

Never unplug the mains plug when the appliance is 

in operation.

Please note the following information and ensure that:

Notes

■

The mains plug fits the socket.

■

The cable cross section is adequate.

■

The earthing system is properly installed.

■

The mains cable is only replaced by a qualified 

electrician (if this is necessary).Spare mains cables 

can be ordered from our after-sales service.

■

No power strips/multi-way connectors or extension 

cables are used.

■

If using a residual current device, only use one that 

bears the mark 

z

.

The presence of this mark is the only way to be sure 

that it fulfils all the applicable regulations.

■

The mains plug can be accessed at all times.

■

The mains cable is not kinked, crushed, modified or 

severed.

■

The mains cable does not come into contact with 

heat sources.

Measures to be noted during transport

Secure all mobile parts in and on the appliance using 

an adhesive tape that can be removed without leaving 

any traces. Push all accessories (e.g. baking tray) into 

the corresponding slots with cardboard at the edges, in 

order to avoid damaging the appliance. Place 

cardboard or similar between the front and rear side to 

prevent knocks against the inside of the glass door. 

Secure the door and, if available, the top cover to the 

appliance sides using adhesive tape.
Keep the original appliance packaging. Only transport 

the appliance in the original packaging. Observe the 

transport arrows on the packaging.

If the original packaging is no longer available

pack the appliance in protective packaging to 

guarantee sufficient protection against any transport 

damage.
Transport the appliance in an upright position. Do not 

hold the appliance by the door handle or the 

connections on the rear, as these could be damaged. 

Do not place any heavy objects on the appliance.