Bosch HBF134BS0K, Instruction Manual

en

    Time-setting options

14

3.

Use the 

A

 or 

@

 button to set the cooking time.

The appliance will start heating after a few seconds. The 

remaining time will count down on the display.

The cooking time has elapsed

An audible signal will sound. The appliance will stop 

heating. The cooking time will be zero on the display.
Once the signal stops, you can touch the 

@

 button to 

set a new cooking time.
Once your food is cooked, turn the function selector to 

the "Off" position to switch the appliance off.

Changing and cancelling

You can use the 

A

 or 

@

 button to change the cooking 

time at any time.After a few seconds, the change will be 

applied.
To cancel, use the 

A

 button to reset the cooking time all 

the way to zero. The appliance will continue heating 

without a cooking time.

Setting the end time

You can delay the time at which cooking is due to 

finish. You can, for example, put your food in the 

cooking compartment in the morning and set the 

cooking time so that it is ready at lunch time.

Notes

■

Make sure that food is not left in the cooking 

compartment for too long as it may spoil.

■

Do not adjust the end time once the appliance is 

already in operation. Otherwise the cooking result 

may no longer be satisfactory.

The end of the cooking time can be delayed by up to 

23 hours and 59 minutes.

Example in the picture: The time is 10.30 a.m., a 

cooking time of 45 minutes has been set and you want 

the food to be ready at 12.30 p.m.

1.

Set the type of heating and temperature or setting.

2.

Touch the 

v

 button twice and use the 

A

 or 

@

 button 

to set the cooking time.

3.

Touch the 

v

 button again.

The end time 

y

 will be highlighted on the display.

4.

Use the 

@

 or 

A

 button to delay the end time.

The appliance will apply the settings after a few 

seconds. The end time will be shown on the display. 

Once the appliance starts, the time will begin counting 

down.

The cooking time has elapsed

An audible signal will sound. The appliance will stop 

heating. The cooking time will be zero on the display.
Once the signal stops, you can touch the 

@

 button to 

set a new cooking time.
Once your food is cooked, turn the function selector to 

the "Off" position to switch the appliance off.

Changing and cancelling

You can use the 

A

 or 

@

 button to change the end time. 

After a few seconds, the change will be applied. The 

end time cannot be changed once the cooking time has 

already started to count down. Otherwise the cooking 

result would no longer be satisfactory.
To cancel, use the 

A

 button to set the end time all the 

way back to the current time plus the cooking time. The 

appliance will start to heat and the cooking time will 

start to count down.

Setting the timer

You can use the timer whether or not the appliance 

itself is in use. However, it is not possible to set a 

cooking time or end time.
The maximum time that can be set is 23 hours and 59 

minutes. Up to 10 minutes, the timer duration can be 

set in 30-second increments. Above 10 minutes, the 

time increments become longer the higher the value.
The timer duration will start at a different default value, 

depending on which button you touch first: 

5 minutes if you touch the 

A

 button and 10 minutes if 

you touch the 

@

 button.