en
Appliance door
24
5.
Remove the door cover .
6.
Lift out the inner pane and set it down carefully on a
flat surface.
7.
Lift out the intermediate pane and set it down care-
fully on a flat surface.
8.
If necessary, you can remove the condensate
trough for cleaning.
‒
Open the appliance door.
‒
Tilt the condensate trough upwards and remove
it.
9.
WARNING ‒ Risk of injury!
Scratched glass in the appliance door may develop
into a crack.
▶
Do not use any harsh or abrasive cleaners or
sharp metal scrapers to clean the glass on the
oven door, as they may scratch the surface.
Clean the removed door panes on both sides with
glass cleaner and a soft cloth.
10.
Clean the condensate trough with a cloth and hot
soapy water.
11.
Clean the appliance door.
→
"Suitable cleaning agents", Page 17
12.
Dry the door panes and refit them.
→
"Fitting the door panes", Page 24
18.4 Fitting the door panes
WARNING ‒ Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
▶
Keep your hands away from the hinges.
Components inside the appliance door may have sharp
edges.
▶
Wear protective gloves.
1.
Open the appliance door fully.
2.
Place the condensate trough vertically in the re-
tainer and turn it downwards.
3.
Slide the intermediate pane into the left- and right-
hand retainers .
Summary of Contents for HBG5575.0A
Page 35: ......