en
Basic operation
10
7 Basic operation
7.1 Switching on the appliance
▶
Press to switch the appliance on.
a
The Bosch logo appears in the display. The types of
heating then appear.
7.2 Switching off the appliance
Switch your appliance off when you are not using it.
The appliance will switch itself off automatically if it is
not used for a certain period of time.
▶
Press to switch the appliance off.
a
The appliance switches off. Any functions currently
in progress are cancelled.
a
The time or residual heat indicator appears in the
display.
7.3 Starting operation
You must start each operation.
▶
Press to start.
a
The settings, the running time, the display ring and
the heating line appear in the display.
7.4 Pausing or cancelling operation
You can briefly pause operation and then continue. If
you cancel operation completely, the settings will be re-
set.
1.
To pause operation briefly:
‒
Briefly press .
‒
To continue operation, press .
2.
To cancel operation completely, press and hold
for approx. 3 seconds.
a
Operation will stop and all the settings will be reset.
7.5 Setting the type of heating and
temperature
Requirement:
The operating mode "Types of heat-
ing" has been selected.
1.
Use the control ring to set the required type of heat-
ing.
2.
Press .
a
The temperature is highlighted in white.
3.
Use the control ring to set the temperature.
4.
Press to start.
a
The appliance starts heating.
a
The target temperature, the time and how long the
appliance has already been in operation are shown
in the display.
5.
When the food is ready, press to switch the appli-
ance off.
Tip:
The most suitable type of heating for your food
can be found in the description of the type of heating.
Note:
You can also set a cooking time and end time on
the appliance.
"Time-setting options", Page 11
Changing the type of heating
When you change the type of heating, the other set-
tings will also be reset.
1.
Press to pause operation.
2.
Press .
a
The first type of heating appears in the display with
the corresponding default temperature.
3.
Use the control ring to change the type of heating.
Changing the temperature
Once operation has started, you can change the tem-
perature directly.
▶
Use the control ring to change the temperature.
a
The temperature is applied immediately.
Directly selecting types of heating
You can select certain types of heating directly using a
touch field.
1.
Press the touch field for the required type of heat-
ing.
Available types of heating with direct selection:
– 4D hot air
– Top/bottom heating
– Hot air eco
– Grill, large surface
a
The temperature is highlighted in white.
2.
Use the control ring to set the temperature.
3.
Press to start.
a
The appliance starts heating.
a
The target temperature, the time and how long the
appliance has already been in operation are shown
in the display.
7.6 Displaying information
In most cases, you can call up information about the
function that you have just started. The appliance dis-
plays some information, e.g. to ask you to do/confirm
something or to issue a warning, automatically.
1.
Press .
a
If available, information is displayed for a few
seconds.
2.
Use the control ring to scroll through longer pas-
sages of text.
8 Rapid heating
To save time, you can shorten the preheating time for
set temperatures of 100 °C and higher.
You can use rapid heating for the following types of
heating:
¡
4D hot air
¡
Top/bottom heating
