Page 6
Setting Up Your Range
Accessing and Using the Select Functions
Menu
To access the SELECT FUNCTIONS menu, touch and hold
COOKING MODE touch pad for five (5) seconds.
SELECT FUNCTION is displayed.
1. Turn knob to desired feature.
2. Press START to choose any function, and turn knob
to choose any sub-functions.
3. After selecting feature, touch OFF.
4. Touch OFF again to exit the select functions menu.
SELECT FUNCTIONS is the section of the menu where you can set or change the following features on your range:
• There will be a slight delay before
each message (or feature) can be
seen in the display.
• Turn knob slowly, and wait
approximately one second for display
to show next feature.
• To move through the feature
menu, slowly turn the knob clockwise
one click after each feature appears.
TIPS on Using Functions
BEEPS
To indicate when a mode is done,
3 consecutive beeps will sound.
VOLUME (decrease or increase loudness
of control beeps)
TEMPERATURE FORMAT (switch temperature
scale to Fahrenheit or Celsius)
TIME FORMAT (12 hr or 24 hr)
LOCK KEYS (oven control pad lockout )
LANGUAGE OPTION (for display; select English,
Spanish, or French)
CLOCK DISPLAY (yes or no)
OVEN TEMPERATURE OFFSET (used to
calibrate the oven temperature)
DEMO MODE (used by appliance stores)
RESET DEFAULTS (change
all function settings
back to original factory settings)
SABBATH FEATURE (for religious faiths with “no
work” requirements on the Sabbath)
NOTE: In the event of a power failure, the functions return
to the factory settings and will need to be reset.
DEMO