Bosch HGD745225N, Instruction Manual

10

Control panel

Details may vary depending on the appliance model.

Function control knob

The function control knob is used to select the type of heating.

Once a type of heating has been selected the oven light is 

turned on.

Temperature selector

Use the temperature selector to set the temperature and the 

grill setting.

While the oven is heating up, the 

p

 temperature symbol lights 

up in the display. If heating is interrupted, the symbol goes out. 

For some settings, it does not light up.

Burner knob

You can adjust the heat setting of the hotplates using the four 

burner knobs.

There is a limit stop at the end of the settings area. Do not turn 

the timer beyond this.

Buttons and display

You can use the buttons to set various additional functions. On 

the display, you can read the values that you have set.

The time-setting option that is currently selected in the display 

is indicated by brackets [ ] around the corresponding symbol. 

Exception: For the clock, the 

0

 symbol only lights up if the time 

is being changed.

Buttons

The sensors are located under the individual buttons. They 

must not be pressed too firmly. Only touch the corresponding 

symbol. 

The cooking compartment

The oven light is located in the cooking compartment. A cooling 

fan protects the oven from overheating.

Light

The oven light remains on while the oven is working.
However, the light can be turned on without the oven being on 

by setting the function control knob to 

^

.

Cooling fan

The cooling fan switches on and off as required. The hot air 

escapes above the door.
So that the cooking compartment cools down more quickly 

after operation, the cooling fan continues to run for a certain 

period afterwards.

Caution!

do not cover the ventilation slots. Otherwise the oven will 

overheat.

Setting

Use

Û

Zero setting

The oven is off.

<

3D Hot air*

For cakes and pastries. These can 

be baked on three levels. A fan 

located on the rear wall of the 

oven disperses the heat evenly.

%

Top and bottom heat-

ing*

For cakes, au gratin dishes, and 

lean meat roasts, e.g. veal or 

game, on one level. The heat is 

provided by the bottom and top 

heating elements.

6

Pizza function

Quick preparation of frozen foods 

without pre-heating, e.g., pizza, 

chips or puff pastry. The heat 

comes from the bottom element 

and the fan on the rear wall.

7

Grill with hot air

For roasting joints of meat, poultry 

and fish. The grill heating element 

and the fan switch on and off alter-

nately. The fan circulates the heat 

generated by the grill around the 

food.

(

Large surface grill

For grilling steaks, sausages, fish 

and toasting bread. The entire sur-

face below the grill heating ele-

ment is heated.

*

Grill, small surface 

area

For grilling a small number of 

steaks or sausages or small 

amounts of fish, and toasting 

bread. Only the central area of the 

grill heating element heats up.

$

Bottom heating

Confits, baking and cooking au 

gratin. The heat comes from the 

bottom heating element.

B

Defrosting

Defrosting, e.g. meat, poultry, 

bread and cakes. The fan circu-

lates the hot air around the food.

^

Light

For turning on the oven light.

* Type of heating used to determine the appliance's energy effi-

ciency rating according to EN60350.

Positions

Function

ÿ

Zero position

Oven not hot.

50-270

Temperature 

range

Temperature in  °C.

1, 2, 3

Grill settings

Grill settings for the 

*

 Grill, 

small area and 

(

 Grill, large 

area.
Setting 1 = low
Setting 2 = medium
Setting 3 = high

Positions

Function/gas oven

þ

Zero position

The oven is switched off.

8

Ignition position

Ignition position

—

˜

Settings area

Large flame = highest setting 

Economy flame = lowest setting

Button

Use

c

Rapid heating

Heats up the oven particularly 

quickly.

0

Time-setting options

Selects the timer 

U

, cooking 

time 

r

, end time 

p

 and clock 

0

.

D

Childproof lock

Locks and unlocks oven functions.

A
@

Minus
Plus

Decreases the set values.
Increases the set values.