12
Setting the oven
In this section, we will explain how you can select the required
type of heating and temperature or grill setting.
This is how you adjust the lower gas burner in
the oven
When the lower gas burner is lit, you can bake on a baking
sheet with the oven door closed.
Example in the picture: Heat to 200 °C
1.
Open the top cover. The top cover must remain open for as
long as the oven is in operation.
2.
Open the main gas supply to the appliance. Connect the plug
in the socket. Open the oven door.
3.
Push in the switch for the lower gas burner and turn it
clockwise to 200 °C.
4.
While holding the switch for the oven's lower gas burner
depressed, press the ignition button
8
.
5.
The gas escaping from the oven's lower gas burner is ignited
using the ignition button. To activate the safety pilot, press
and hold the lower gas burner on the oven for 10 seconds.
The safety pilot is activated. If the gas flame goes out, the gas
supply is automatically interrupted by the safety pilot.
6.
Look through the inspection port to make sure that the flame
is lit. If it is not, repeat the process from step 3.
7.
Close the oven door slowly.
8.
Preheat the empty oven for approximately 15 minutes before
baking.
9.
When the dish has finished cooking, turn off the switch for the
lower gas burner.
You can change the temperature at any time.
ã=
Caution!
The ignition device should not be actuated for more than 15
seconds. If the burner does not light within 15 seconds, wait for
at least one minute. Then repeat the ignition process.
The oven's lower gas burner is set with the
upper heating element as follows
When the lower gas burner is lit and the upper heating element
is switched on at certain intervals, you can bake on a baking
sheet with the oven door closed.
Example in the picture: Heat to 200 °C
1.
Open the top cover. The top cover must remain open for as
long as the oven is in operation.
2.
Open the main gas supply to the appliance. Connect the plug
in the socket. Open the oven door.
3.
Push in the switch for the lower gas burner and turn it
clockwise to 200 °C.
4.
While holding the switch for the oven's lower gas burner
depressed, press the ignition button
8
.
5.
The gas escaping from the oven's lower gas burner is ignited
using the ignition button. To activate the safety pilot, press
and hold the lower gas burner on the oven for 10 seconds.
The safety pilot is activated. If the gas flame goes out, the gas
supply is automatically interrupted by the safety pilot.
6.
Look through the inspection port to make sure that the flame
is lit. If it is not, repeat the process from step 3.
7.
Press the multi-function button. The electric grill is switched
on when you press the multi-function button. The oven light
comes on.
8.
Turn the switch for the electric grill clockwise to 200 °C.
9.
Close the oven door slowly.
10.
When the dish has finished cooking, press the multi-function
button. The electric grill is switched off. The oven light goes
out. Turn off the switch for the electric grill. Turn off the switch
for the oven's lower gas burner.
You can change the temperature at any time.
ã=
Caution!
The ignition device should not be actuated for more than 15
seconds. If the burner does not light within 15 seconds, wait for
at least one minute. Then repeat the ignition process.
This is how you adjust the electric grill in the
oven
Example in the picture: Electric grill setting
(
1.
Open the top cover. The top cover must remain open for as
long as the oven is in operation.
2.
Open the main gas supply to the appliance. Connect the plug
in the socket.
Summary of Contents for HGG933150J
Page 2: ......
