Bosch HGW3ASQ50M, Instruction Manual

en

    Operating the appliance

20

Operating the oven
Switching on the oven gas burner

1.

Open the top cover of the appliance.

2.

Open the oven door.

3.

Press and hold the selector for the oven to the 

ignition position 

8

.

The gas burner ignites.

4.

Press and hold the selector for a few seconds until 

the flame stabilises.

5.

Turn the selector for the oven to the required 

temperature.

6.

Close the oven door carefully.

Do not press the ignitor for longer than 15 seconds. If 

the burner does not ignite within 15 seconds, wait at 

least one minute before repeating the procedure.
In the event of the burner flames being accidentally 

extinguished, turn off the burner control and do not 

attempt to re-ignite the burner for at least one minute.

If the flame goes out

Switch off the control knob. Wait one minute and switch 

the burner on again.

:

Warning – Risk of fire! 

If the flame goes out, gas will escape. Never leave the 

gas burner unattended during operation. Ensure that 

there are no draughts.

Switching off the oven gas burner

Turn the selector to the 

Û

 position.

Operating the grill

Note: 

Keep the appliance door closed while you are 

using the grill function.

1.

Open the top cover of the appliance.

2.

Open the oven door.

3.

Press and hold the selector for the grill and turn it to 

the "

—

" position. 

The gas burner ignites.

4.

Press and hold the selector for a few seconds until 

the flame stabilises.

5.

Turn the selector for the grill to the required grill 

setting.

Note: 

The flame is not stable between positions 

Û

and 

—

. Always select a position between "

—

" and "

˜

".

6.

Close the oven door carefully.

Do not press the ignitor for longer than 15 seconds. If 

the burner does not ignite within 15 seconds, wait at 

least one minute before repeating the procedure.
In the event of the burner flames being accidentally 

extinguished, turn off the burner control and do not 

attempt to re-ignite the burner for at least one minute.

If the flame goes out

Switch off the control knob. Wait one minute and switch 

the burner on again.

:

Warning – Risk of fire! 

If the flame goes out, gas will escape. Never leave the 

gas burner unattended during operation. Ensure that 

there are no draughts.

Switching off the grill

Turn the control knob to the 

Û

 position.

Using combination mode

Note: 

The temperature range marked on the selector 

for the oven applies only when using conventional 

heating. In combination mode, the temperature in the 

oven is higher than the temperature that has been set.

Switching on combination mode

1.

Open the top cover of the appliance.

2.

Open the oven door.

3.

Press and hold the selector for the oven to the 

ignition position 

8

.

The oven gas burner ignites. Press and hold the 

selector for a few seconds until the flame stabilises

4.

Turn the selector for the oven to the required 

temperature.

5.

Press and hold the selector for the grill and turn it to 

the "

—

" position. 

The grill gas burner ignites. Press and hold the 

selector for a few seconds until the flame stabilises.

6.

Close the oven door carefully.

7.

Set the required temperature using the selectors for 

the grill and oven.

Caution!

If the grill and oven gas burners are operating at the 

same time (combination mode); when cooking with 

water, the grill gas burner may go out due to the air 

circulation.

Notes

■

If the gas burner does not ignite within 15 seconds, 

stop attempting to ignite the flame, open the oven 

door and wait for 60 seconds.

■

If the flame inadvertently goes out, turn the selector 

to the "

Û

" position and wait for 60 seconds.

Switching off combination mode

Turn the selector for the grill and oven to 

Û

.

Position

Meaning

˜

Small flame, lowest setting

—

Large flame, highest setting