Appliance door
en
27
Removing and refitting the door panels
The glass panels can be removed from the oven door
to allow more thorough cleaning.
Removing
1.
Detach the oven door. To do this, read the section
entitled
"Detaching the door"
. Position the oven door it
on a cloth with its handle pointing downwards.
2.
Remove the cover at the top of the oven door. To do
this, press in the tabs on the left and right using your
fingers. Pull out and remove the cover (Fig. A).
3.
Lift the top panel up and out (Fig. B).
Clean the glass panels with glass cleaner and a soft
cloth.
:
Warning – Risk of injury!
Scratched glass in the appliance door may develop into
a crack. Do not use a glass scraper, sharp or abrasive
cleaning aids or detergents.
Installation
1.
Hold the top panel firmly on both sides and insert it
at an angle towards the back. When doing so,
ensure that you push the panel into the openings on
the underside. The smooth surface must face
outwards and the rough surface must face inwards.
(Fig. A).
2.
Place the cover at the top of the oven door and
press it on. Make sure that the lugs on both sides
engage.
3.
Attach the oven door. To do this, see the section
entitled
Attaching the oven door
.
Only use the oven once the glass panels have been
correctly fitted.
%
$
$
Summary of Contents for HGW3ASQ50M
Page 2: ......
