en
Rails
28
p
Rails
Rails
With good care and cleaning, your appliance will retain
its appearance and remain fully functional for a long
time to come. This will tell you how to remove the
shelves and clean them.
Detaching and refitting the rails
The rails can be removed for cleaning. The oven must
have cooled down.
Unhooking the rails
1.
Hold the shelf frames from underneath and pull
slightly forward. Pull the extension pins at the bottom
of the rails out of the mounting holes (Fig. A).
2.
Then fold the rails upwards and carefully remove
them (Fig. B).
Clean the rails with washing-up liquid and a sponge. For
stubborn deposits of dirt, use a brush.
Installing the frames
1.
Insert the two hooks carefully into the upper holes.
(Figure A-B)
:
Warning
Incorrect assembly!
Never move the frame before the two hooks are fully
anchored in the upper holes. The enamel could be
damaged and may break (figure C).
2.
the two hooks must be inserted fully into the upper
holes. Now move the frame slowly and carefully
downwards and insert in the lower holes (figure D).
3.
Insert both frames into the side walls of the oven
(figure E).
If the rails are fitted correctly, the distance between the
two upper shelf positions is greater.
%
$
%
$
&
(
'
Summary of Contents for HGW3ASQ50M
Page 2: ......
