Time-setting options
en
21
5.
Remove the handle and close the oven door. (Figure
D)
Switching on the rotary spit
Note:
When using the rotisserie spit, heat the oven
using the
(
heating mode. Insert the rotisserie spit
before setting the
F
heating mode.
1.
Turn the control knob for the oven to the
F
position.
2.
Set the temperature.
Note:
Add some water to the universal pan to catch any
fat that drips out.
Removing the rotary spit
:
Warning – Risk of scalding!
Never touch the hot surfaces of the cooking
compartment or the heating elements. Keep children
away from the appliance at all times. Open the
appliance door carefully. Hot steam may escape from
the appliance.
:
Warning – Risk of scalding!
Never touch the rotary spit or other accessories directly
when they are hot. Always use a pot holder or wear
oven gloves to handle accessories when they are hot.
1.
When the dish has finished cooking, switch off the
selector for the grill and rotary spit grilling.
2.
Open the appliance door carefully.
3.
Slide the handle onto the rotary spit and screw it on.
4.
Pull out the rotary spit carefully from the installation
location.
5.
Remove the baking tray.
O
Time-setting options
Time-setting options
Your appliance has different time-setting options.
A signal sounds once the timer duration has elapsed.
You can cancel the audible signal early by tapping the
v
button.
Note:
You can change how long the audible signal
sounds for in the basic settings.
Setting the timer
The timer runs alongside other settings. You can set it
at any time, even if the appliance is switched off. It has
its own audible signal so that you can tell whether it is
the timer or a cooking time which has elapsed.
You can set a duration of up to 23 hours 59 minutes.
Up to 10 minutes, the timer duration can be set in 30-
second increments. Above 10 minutes, the time
increments become longer the higher the value.
The timer duration starts at a different default value,
depending on which button you tap first:
5 minutes if you tap the
A
button and 10 minutes if you
tap the
@
button.
1.
Tap the
v
button until the timer symbol
t
is
highlighted.
2.
Use the
A
or
@
button to set the timer duration.
After a few seconds, the timer duration will start to
count down.
The timer duration has elapsed
An audible signal will sound. The timer duration will be
zero on the display.
Touch any button to switch off the timer.
Changing and cancelling
You can use the
A
or
@
button to change the timer
duration at any time. After a few seconds, the change
will be applied.
To cancel, use the
A
button to reset the timer duration
all the way to zero. The timer is now switched off.
'
&
Time-setting option Use
t
Timer
The timer functions like an egg timer. It runs
independently of the appliance when it is in
operation and of other time-setting options,
and does not affect the appliance.
v
Time
When no other function is running in the fore-
ground, the appliance shows you the time of
day in the display.
