en
Operating the appliance
16
1
Operating the appliance
Operating the appliance
You have already learnt about the controls and how
they work. Now we will explain how to apply settings on
your appliance.
Switching the appliance on and off
Use the function selector to switch the appliance on or
off. Turning the function selector to any position other
than the "Off" position switches on the appliance. To
switch off the appliance, always turn the function
selector to the "Off" position.
Setting the type of heating and temperature
It is very easy to apply the settings you require to your
appliance using the function and temperature selector.
To find out which heating function is best for which type
of food, refer to the beginning of the instruction manual.
Example in the picture: Top/bottom heating
%
at
190 °C.
1.
Use the function selector to set the heating function.
2.
Use the temperature selector to set the temperature
or grill setting.
The appliance starts to heat up after a few seconds.
Once the food is cooked, turn the function selector to
the "Off" position to switch the appliance off.
Changing
The heating function and temperature can be changed
at any time using the relevant selector.
Rapid heating
With Rapid heating, you can shorten the heat-up time.
Then, for best results, use:
■
<
3D hot air
■
%
Top/bottom heating
Only use Rapid heating when a temperature of over
100 °C has been selected.
To achieve an even cooking result, do not place your
food into the cooking compartment until Rapid heating
is complete.
1.
Set the function selector to
F
.
2.
Use the temperature selector to set the temperature.
The oven will start heating after a few seconds.
When the rapid heating process ends, the heat-up
indicator goes out.
Place your food in the cooking
compartment.
&