7
Changing the cooking time
This can be done at any time. Change the cooking time using
the rotary selector.
Pausing
Press the Stop button once or open the appliance door.
Operation is suspended. The display above Start flashes. After
closing the door, press the Start button again.
Cancelling operation
Press the Stop button twice, or open the door and press the
Stop button once.
Note:
You can also adjust the cooking time first and then the
microwave power setting.
Cooling fan
The appliance is equipped with a cooling fan. The fan may run
on even if the oven has been switched off.
Notes
■
The cooking compartment remains cold during microwave
operation. The cooling fan will still switch on. The fan may run
on even when microwave operation has ended.
■
Condensation may appear on the door window, interior walls
and floor. This is normal and does not adversely affect
microwave operation. Wipe away the condensation after
cooking.
Memory
You can save the settings for a dish in the memory and call it
up again at any time.
The memory is useful for if you frequently prepare a specific
dish.
Saving memory settings
Example: 360 watts, 25 minutes
1.
Press the
f
button.
The indicator light above the button lights up.
2.
Press the required microwave power setting.
The indicator light above the button lights up and 1:00 min
appears in the display.
3.
Set the cooking time using the rotary selector.
4.
Confirm by pressing the
f
button.
The clock reappears. The setting is saved.
Notes
■
You can save the memory settings and start the appliance
immediately. When finishing, instead of pressing
f
, press
start.
■
You cannot save several microwave power settings one after
the other.
■
You cannot save automatic programmes.
Adding to the memory
1.
Press the
f
button.
The old settings appear.
2.
Save the new programme as described in steps 1 to 4.
Starting the memory
It is very easy to start the saved programme. Place your meal
into the appliance. Close the appliance door.
1.
Press the
f
button.
The saved settings are displayed.
2.
Press the start button.
The cooking time counts down in the display.
The cooking time has elapsed
A signal sounds. Open the appliance door or press Stop. The
clock reappears.
Pausing
Press the Stop button once or open the appliance door.
Operation is suspended. The display above Start flashes. After
closing the door, press the Start button again.
Cancelling
Press the "stop" button twice, or open the door and press the
"stop" button once.
Changing the signal duration
You will hear a signal when the appliance is switched off. You
can change the duration of the acoustic signal.
Press the "start" button for approx. 6 seconds.
The new signal duration is adopted.
The clock reappears.
The following are possible:
Short signal duration - 3 tones
Long signal duration - 30 tones.
VWRS
VWDUW
PLQ
NJ
PLQ
