background image

6

en | Introduction to the IntuiKey Keyboard Series

IntuiKey Keyboard

F.01U.080.637 | 1.92 | 2008.12

User Manual

Bosch Security System, Inc.

1.7

Alarm/Alert/Action Indication

When the IntuiKey detects that an alarm/alert/action condition has occurred on the presently 

controlled device, the 

 key flashes red and an audible tone is heard. During alarm 

responses, Divar DVRs and System4 multiplexers will also show special icons to represent the 

different types of alarm conditions. Contact type alarm conditions will be represented by a 

 icon, and action alarm conditions will be represented by a 

 icon. To silence an alarm, 

press the Alarm/Alert/Action key. 

If the alert occurs on a device that is not presently under control, the product indicator (in the 

status display) alternates between the present product designator and the alarmed product, 

with the text ALERT added. The present product is displayed for two seconds, while the 

alarmed product is displayed for 0.5 seconds. 

i

NOTICE! 

This functionality is not supported when the IntuiKey is operating in Terminal Mode. 

Summary of Contents for IntuiKey



















































Reviews: