Bosch Intuvia BUI255 Owner'S Manual Download

Page: 153 / 368

English –

Displays and settings of the
SmartphoneHub

The SmartphoneHub is connected to the drive unit via a
cable.
The smartphone is mechanically connected to the Smart-
phoneHub via a smartphone attachment.
The communication between the SmartphoneHub and
smartphone takes place via

Bluetooth

®.

The SmartphoneHub has a scratch-resistant 1.52" LCD dis-
play with a resolution of 192 × 64 pixels. The integrated dis-
play is suitable for use without a corresponding smartphone.
No app content of the smartphone can be shown on the in-
tegrated display.

KM/H

a b

Error indicator:
This indicator appears when at least one error is
present in the error memory.

Bicycle lighting indicator:
This indicator appears when the light is switched on.

Smartphone connection indicator:
This indicator appears when the smartphone is
connected to the SmartphoneHub via

Bluetooth

®.

This indicator appears when the smartphone is
connected to the SmartphoneHub and the

COBI.Bike

app is open on the smartphone. In

this setting, the

COBI.Bike

app will record your

ride.

Speed:
The current speed is displayed here.

Assistance level indicator

TOUR

ECO

OFF

SPORT

TURBO

Unit indicator:
Depending on the settings selected in the

COBI.Bike

app, the speed can either be shown in km/h or mph.
The default setting is km/h.

Indicator for second battery:
If the eBike is equipped with two batteries, the two
batteries are shown here in succession.

Battery charge indicator:
The battery symbol displays the current state of
charge of the battery.

The battery is empty or not inserted.

State of charge of the battery in per cent

Range of the eBike battery:
Depending on the state of charge of the battery, the
maximum range is shown here.

Other displays

498

1/1

An error has occurred.
The error indicator will remain on the
indicator until the user presses the se-
lect button

(9)

to acknowledge the er-

ror. The warning triangle subsequently
remains in the main display view
(alongside speed, etc.) until the error
has been resolved.

HOLD ‘+‘ NOW

In a two-step activation process, after
pressing the button

(13)

, the rider is

prompted to press the

button

(14)

for two seconds.

After two seconds, the push assist-
ance mode is displayed.

ENGINE OFF

D I S A B L E D

n/a

This indicator and the text shown on
the left appear when there are prob-
lems that mean that the drive unit can-
not provide any assistance. This is the
case if the eBike battery is empty, for
example.

68%

If the eBike battery is being charged,
the screen shows the current state of
charge. The battery symbol flashes.

This indicator appears, if, for ex-
ample,
– the DiagnosticTool is connected or
– an external power source (e.g. a

power bank) is connected to the
SmartphoneHub

KM/H

If the state of charge of the eBike bat-
tery is below 20 %, the battery charge
indicator

will flash.

This indicator appears, if, for ex-
ample,
– the state of charge of the eBike bat-

tery is low or

– the system does not recognise an

eBike battery.

The assistance is switched off.