Bosch Intuvia BUI255 Owner'S Manual Download

Page: 154 / 368

English –

You can independently carry out the
update in the

COBI.Bike

app and do

not need to visit your Bosch eBike
dealer.

This indicator appears when the
SmartphoneHub is connecting to the
smartphone.

The completion of the

Bluetooth

® pair-

ing is indicated by means of a tick
against the small smartphone symbol.

This indicator appears whenever the
SmartphoneHub is in recovery mode
(only in this status can new software
be installed). The small

Bluetooth

symbol indicates the connection to
the smartphone.

The completion of the recovery opera-
tion is indicated by a tick.

CHECK APP

Your operating system is non-func-
tional for the following reasons:
1. One or more incompatible com-

ponents have been detected. This
situation can only be rectified by a
Bosch eBike dealer.

2. An out-of-date version of the soft-

ware has been detected. This can
only occur as a result of an inten-
tional software downgrade. The
problem can be resolved with a
software update; please follow
the instructions in the

COBI.Bike

app.

Following this notification, the eBike
system switches off.

APP MODE

This indicator appears if the

COBI.Bike

app is open and is in dash-

board mode.

+ t o s t a r t

This indicator appears if the

COBI.Bike

app is connected to the

Bosch SmartphoneHub and the drive
unit has not yet been switched on. To
do this, undertake one of the following
actions:
– Press the "Start" button in the

COBI.Bike

app.

– With the

COBI.Bike

app open, ro-

tate the smartphone so that it is in
landscape.

– Press the

button on the operating

unit.

eBike system
update necessary

1/1

This indicator appears if one or more
eBike components require a software
update.

The update can only be carried out by
an authorised Bosch eBike dealer.

You can hide the indicator by pressing
any button on the operating unit. The
indicator will appear every time the
eBike system is started until the up-
date has been carried out. You can
still continue to use your eBike
without any restrictions. The number
at the top right indicates the number
of instructions.

Error code display

The eBike system's components are continuously and auto-
matically monitored. If an error is detected, the correspond-
ing error code is displayed on the on-board computer.
The drive may be automatically shut down, depending on the
type of error. However, if you wish to continue cycling, you
will always be able to do so without assistance from the
drive. Before undertaking any other journeys, the eBike
should be checked.

Have all repairs performed only by an authorised bike
dealer.

Code

Cause

Corrective measures

410

One or more buttons of the on-board com-
puter are disabled.

Check whether any buttons are stuck, e.g. as a result of dirt finding
its way in. Clean the buttons if need be.

414

Operating unit connection problem

Have the connections checked

418

One or more buttons on the operating unit
are disabled.

Check whether any buttons are stuck, e.g. as a result of dirt finding
its way in. Clean the buttons if need be.

419

Configuration error

Restart the system. If the problem persists, contact your Bosch
eBike dealer.

422

Drive unit connection problem

Have the connections checked

423

eBike battery connection problem

Have the connections checked

424

Communication problem between com-
ponents

Have the connections checked

426

Internal time-out error

Restart the system. If the problem persists, contact your Bosch
eBike dealer. With this error, it is not possible to bring up the wheel
circumference in the basic settings menu or to adjust it.

1 270 020 XBC | (22.03.2021)

Bosch eBike Systems

154