Bosch Intuvia BUI255 Owner'S Manual Download

Page: 99 / 368

English –

–

SPORT/eMTB:
SPORT:

Powerful assistance, for mountain biking and

cycling in urban traffic

eMTB:

Optimum assistance whatever the terrain, rapid

acceleration when starting from a standstill, improved dy-
namics and top performance (

eMTB

only available in

combination with the drive units BDU250P CX, BDU365,
BDU450 CX and BDU480 CX. A software update may be
required.)

–

TURBO:

Maximum assistance even at high pedalling

speeds, for sport cycling

increase

the assistance level, press the

(12)

button on

the operating unit repeatedly until the desired assistance
level appears on the display. To

decrease

the assistance

level, press the

–

(11)

button.

The requested motor output appears on the display

(see

"Start page", page English – 7). The maximum motor out-
put depends on the selected assistance level.
If the on-board computer is removed from the holder

(5)

the assistance level that was last displayed is saved.

Switching the push assistance on/off

The push assistance aids you when pushing your eBike. The
speed in this function depends on the selected gear and can
reach a maximum of

km/h

. The lower the selected gear,

the lower the speed of the push assistance function (at full
power).

The push assistance function must only be used when
pushing the eBike.

There is a risk of injury if the wheels

of the eBike are not in contact with the ground while using
the push assistance.

activate

the push assistance, briefly press the

WALK

button on your on-board computer. After activation, press
the

button within 3 s and keep it pressed. The eBike drive

is switched on.

Note:

The push assistance cannot be activated at assistance

level

OFF

The push assistance is

switched off

as soon as one of the

following occurs:
– You release the

button;

– The wheels of the eBike are locked (e.g. by applying the

brakes or hitting an obstacle);

– The speed exceeds

km/h

The push assistance function is subject to local regulations;
the way it works may therefore differ from the description
above, or the function may even be deactivated completely.

Switching bicycle lights on/off

On the model on which the lighting is powered by the eBike
system, the front and rear lights can be switched on and off
at the same time via the on-board computer using the bike
light button

(3)

Check that your bike lights are working correctly before
every use.
With the light switched on, the lighting

indicator (see "Start

page", page English – 7) appears in the status bar on the
display.

Switching the bike lights on and off has no effect on the
backlighting of the display.

Creating a user ID

To be able to use all functions of the on-board computer, you
must register online.
With a user ID, you can analyse your ride data, plan offline
routes and transfer these routes to the on-board computer.
You can set up a user ID via your

Bosch eBike Connect

smartphone app or simply at www.ebike-connect.com.
Enter the details required for registration. The

Bosch eBike

Connect

smartphone app is available to download free of

charge from the App Store (for Apple iPhones) or from the
Google Play Store (for Android devices).

Connecting to the On-Board Computer using the
Bosch eBike Connect App

Follow these steps to establish a connection to your smart-
phone:
– Load the app.
– Select the tab

<My eBike>

– Select

<Add new eBike device>

– Add

Kiox

The app will then display an instruction to press and hold the
bike lighting button

(3)

on the on-board computer for

5 seconds.
Press and hold the button

(3)

for at least 5 seconds. The on-

board computer automatically activates the

Bluetooth

Low

Energy

connection and switches to pairing mode.

Follow the instructions on the screen. Once pairing is com-
plete, the user data is synchronised.

Note:

The

Bluetooth

® connection does not have to be activ-

ated manually.

Activity tracking

In order to record activities, you must be registered with and
logged into the eBike Connect portal or the eBike Connect
app.
To record activities, you must consent to the storage of your
location data in the portal and/or in the app. Without this,
your activities will not be shown in the portal or the app. The
position is recorded only if you are registered as a user on
the on-board computer.

eShift (optional)

eShift is the integration of electronic gear-shifting systems
into the eBike system. The eShift components are electric-
ally connected to the drive unit by the manufacturer. The
separate operating instructions describe how to operate the
electronic gear-shifting systems.

eSuspension (optional)

eSuspension is the integration of electronic shock absorp-
tion and suspension elements into the eBike system. You
can use the

Quick Menu

to select predefined settings for the

eSuspension system.

Bosch eBike Systems

1 270 020 XBK | (19.03.2021)