Bosch KIF81H Series, Instructions For Use Manual

Home Connect  

en

11

o

  Home  Connect

Home Connect

This appliance is Wi-Fi-capable and can 

be remotely controlled using a mobile 

device.

Note:  

Wi-Fi is a registered trademark of 

the Wi-Fi Alliance.

In the following cases, the appliance 

functions like a refrigerator without a 

network connection and can still be 

manually operated via the controls:

■

The appliance is not connected to a 

home network.

■

Home Connect service is not 

available in the country in which the 

appliance is set up. For an overview 

of the countries in which Home 

Connect is available, see 

www.home-connect.com.

Note:  

Please observe the safety 

information in this instruction manual. 

Ensure that this is also observed if you 

operate the appliance via the Home 

Connect app and are not at home when 

doing so.  

~

 "Safety instructions" on page 3

Follow the instructions in the Home 

Connect app as well.

Setting up Home Connect

Notes

■

Observe the Home Connect 

supplementary sheet, which is 

available for download under 

www.bosch-home.com with the 

instructions. To do so, enter the 

E-number of your appliance in the 

search field.

■

After switching on the appliance, 

wait at least two minutes until 

internal device initialisation is 

complete. Only then start setting up 

Home Connect.

■

To implement settings with Home 

Connect, the Home Connect app 

must be installed on your mobile 

device.

Observe the supplied Home 

Connect documents for this.

Follow the steps specified by the 

app to implement the settings.

■

The Home Connect menu will close 

automatically when the appliance is 

not operated for a lengthy period of 

time. You can find information on 

how to open the Home Connect 

menu at the start of the appropriate 

sections.

Automatic connection with the home 

network (WLAN)

If a WLAN router with WPS function is 

available, the refrigerator can be 

automatically connected to the home 

network.

1.

Press 

E

 button. 

Temperature display shows 

Cn

.

2.

Press 

super

 button until temperature 

display shows 

AC

.

3.

Press 

¿

 button.

The appliance is ready for automatic 

connection.

The temperature display shows an 

animation for 2 minutes.

The appliance is ready for automatic 

connection for as long as the 

animation is displayed.

4.

Within those 2 minutes activate the 

WPS function on the home network 

router (e.g. using 

WPS/WLAN button. Observe the 

information on this topic in the router 

documentation).

If connection is successful, 

On

flashes in the temperature display.

The refrigerator is ready to connect 

to the app.

Note:  

If the temperature display shows 

OF

, no connection could be 

established.