Bosch KIF81H Series, Instructions For Use Manual

Home Connect  

en

13

5.

Follow the instructions in the app 

until the process is complete.

The temperature display shows 

PA

.

The refrigerator has been connected 

to the app.

If the connection fails, check whether 

the mobile device is connected to 

the home network (WLAN). 

Then try to establish the connection 

again.

If 

Er

 appears in the temperature 

display, reset the Home 

Connect settings.

Note:  

On resetting, all Home 

Connect settings are reset.

Resetting Home Connect settings

If there is a problem when trying to 

establish a connection or if you would 

like to register the appliance in a 

different home network (WLAN), the 

Home Connect settings can be reset:

1.

Press 

E

 button. 

Temperature display shows 

Cn

.

2.

Press 

super

 button until temperature 

display shows 

rE

.

3.

Press 

¿

 button.

Temperature display shows an 

animation for 15 seconds.

The temperature display then 

shows 

On

.

The Home Connect settings have 

been reset.

Installing updates for the 

Home Connect software

The refrigerator checks at regular 

intervals whether updates are available 

for the Home Connect software.
If an update is available, the 

temperature display shows 

UP

.

Press any button to return the display to 

the set temperature.

Install the update:

1.

Press 

E

 button. 

Temperature display shows 

Cn

.

2.

Press 

super

 button until temperature 

display shows 

UP

.

3.

Press 

¿

 button.

The temperature display shows an 

animation.

The update is installed.

All buttons are locked during 

installation.

–

If installation was successful, 

temperature display shows 

On

. 

–

If installation was not successful, 

temperature display shows 

Er

. 

Start the update again at a later 

time.

Inform Customer Service if 

installation has still not been 

successfully completed after 

several attempts.

Information on data protection

The first time your Home Connect 

appliance is registered on the WLAN 

network connected to the Internet, your 

appliance will transmit the following 

types of data to the Home Connect 

server (initial registration):

■

Unique appliance identification 

(consisting of appliance codes as 

well as the MAC address of the 

installed Wi-Fi communication 

module).

■

Security certificate of the Wi-Fi 

communication module (to ensure a 

secure IT connection).

■

The current software and hardware 

version of your domestic appliance.

■

Status of any previous resetting to 

factory settings.

This initial registration prepares the 

Home Connect functions for use and is 

only required when you want to use 

these Home Connect functions for the 

first time.