4.3
Replacing sliding hinge
Required tools:
Torx Bit TX20
6,3 mm (1/4")
[00340865]
Warning
Heavy, bulky appliances!
Back and muscle injuries
▶
Appliance door removal operation should only be carried out by
trained specialists.
▶
To move the appliance, two people are required.
▶
Use only suitable tools and equipment.
Caution
Sharp edges!
Cut injuries
▶
Wear protective gloves.
Caution
Risk of falling parts due to released screws!
Injury because of falling parts.
▶
Secure component from falling down.
Notice
Risk of falling parts due to released screws!
Damage to other parts of the appliance or at customers home e.g. bot-
tom.
▶
Secure component from falling down.
Prerequisite:
Appliance is disconnected from power supply.
Furniture door and appliance door are separated. See Installation Instruction.
4.3.1 Removing sliding hinge
▶
1.
Unscrew two screws (1).
2.
Remove upper hinge (2).
3.
Remove door (3).
4.
Unscrew two screws (4).
5.
Remove lower hinge (5).
Hinges are removed.
4.3.2 Installing sliding hinge
▶
Install in reverse order.
Repair
2022-09-02_9001762436
Copyright by BSH Hausgeräte GmbH
Page 92 of 385
