Bosch Automotive Diagnostics Equipment (Shenzhen) Limited
10 | ��� | Safety instructions
en
�.9
F�� Warning
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:(1)
this device may not cause harmful intererence, and
(2) this device must accept any interference received,
including interference that may cause undesired opera-
tion.
Note: changes or modifications not expressly approved
by the party responsible for compliance could void the
user's authority to operate the equipment. This equip-
ment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, us-
ers and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communica-
tions. However, there is no guarantee the interference
will not occur in a particular insatllation. If this equip-
ment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
R
Reorient or relocate the receiving antenna;
R
Increase the separation between the equipment and
receiver;
R
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connec-
ted;
R
Consult the dealer or an experienced radio/TV tech-
nician for help.
�.10 Satety Warning
R
Inspection shall be carried out in good ventilation.
Connect the exhaust pipe to outside if there is no
enough ventilation;
R
Smoking and open fire are prohibited in the inspec-
tion;
R
The battery liquid contains sulphuric acid that could
erode the skin. Avoid battery liquid from touching
the skin directly in operation, especially note that
the liquid shall not be splashed into eye;
R
The engine temperature is high when running. Avoid
touching the high-temperature parts, such as radia-
tor and exhaust pipe;
R
Pull manual brake before starting the engine. Block
the front wheels and place shift lever at P or neutral
gear to avoid accident when starting the engine;
R
If external batter is used as power supply, pay
attention to the electrode; use red alligator clip to
connect anode and black alligator clip to connect
cathode;
R
Keep all the power cables, pens and tools away from
belt or other moving parts if using instrument in
engine compartment;
R
Do not wear watch, ring and loose clothes in mainte-
nance for engine compartment;
R
Wear approved safety glasses in all inspection pro-
cesses;
R
Only the enclosed power adapter or power supply
cable can be used for supply connection;
R
If the equipment is used in a manner not specified
by the manufacturer, the protection provided by the
equipment may be impaired;
R
Please don't use it to clip the body when Alligator
Clip have powered.
Summary of Contents for KT400
Page 1: ...VCI User Manual ...
Page 2: ......
