Bosch Automotive Diagnostics Equipment (Shenzhen) Limited
�ehicle Diagnostic | ��� | 21
��� | 21
| 21
en
7.4.7
Playing Back Data Stream
Playing back the saved data streams is helpful for time-
ly finding out faults.
Button Description:
R
Exit
: quit the travel record playback;
R
Load
: load the data stream record to be played back;
R
Export
: after loading the data stream playback, the
system can export the data stream playback and
save it in the “CSV” format to the assigned path;
Operation Steps:
1.
After saving the data stream record, the “Load”
button automatically becomes available. Now, click
“Load”, and select the data file you want to play
back;
2.
Click the
(“Play”) button.Now, the “Play” button
switches to the
(“Pause”) button;
3.
You may also click the
(“Stop”) button to stop
the data stream playback and carefully observe whe-
ther the data stream is normal;
4.
If you want to export the data stream playback, you
just need to select a folder directory and click the
button “Save”. The file will be saved in the “.CSV”
format to the path as assigned.
5.
Click "Exit" to quit the “Play Back Data Streams”
function.
i
You may also proceed to the “Play Back Data
Streams” function through the
(“Playback”) but-
ton at the main interface of software;
i
The software interface provides a time progress bar,
through which you can view the duration of current
playback.
7.4.8
Action Test
This function is used to test whether the executive ele-
ments and components of electronic control system
can work normally.
Operation Steps:
1.
After proceeding to the diagnosis function, select
“Action Test”. Now, the interface will display all
available action tests.
2.
Click a test item to proceed to the action test inter-
face. There are three modes for the action test, i.e.
Enable, Disable and Exit;
3.
Click “Enable” to activate the action test;
4.
Click “Disable” to deactivate the action test;
5.
Click “Exit” to quit the action test.
7.4.9
Advanced Functions
The advanced functions (such as Write IQA Codes and
Reset Maintenance Lamps) are functions other than the
basic ones and can modify the internal information of
ECU.
Operation Steps:
¶
Proceed to an advanced function, and operate as per
the interface prompts till the completion.
7.4.10 Audi special function
Because of the method of Audi diagnostic is diffe-
rent from normally. These function include Compo-
nent control test, Read dynamic datastream, Basic
setup,Controller coding, Adjust, Login, Erase self-adap-
tion value.
7.4.10.1 �omponent control test
This function may be used to examine the circuit opera-
tion of action unit, you may check if the unit is working
normally during the unit control test; if this unit works
abnormally, check related electrical units, plug harness
or mechanical unit for trouble.
Operation steps:
1.
Into component control test display, click "Continue"
button to next item, until finished, "Continue" button
change to "Test finished";
2.
Click "Test finished" button to exit this function.
7.4.10.2 Read dynamic datastream
You can read anyone group datastream according to
your repuirement.
No.
Description
①
Datastream value display area;
②
Datastream group edit area.
Operation steps:
1.
Into read dynamic datastream display, select datast-
ream group;
2.
Click "ENT" button to read datastream, the value will
display in top left of screen;
3.
You can click "Pause" button in below right of screen
to pause read datastream, this button will changed
to the "Continue" button, you can click "Continue"
button to read;
4.
Click "Exit" button to exit this function.
Summary of Contents for KT400
Page 1: ...VCI User Manual ...
Page 2: ......
