Bosch Automotive Diagnostics Equipment (Shenzhen) Limited
�ehicle Diagnostic | ��� | 2�
��� | 2�
| 2�
en
7.5
Other Functions Related to Diag-
nostic
7.5.1
The “Print” function provides three options, i.e. “Print
Detection Record” and “Print Diagnosis Report”.
Print Modes:
R
Print: if the computer has been connected with a
printer, direct print is available; or else, you can only
preview the information to be printed.
R
Print to File: see 7.5.1.3.
7.5.1.1 Print Detection Record
It is used to print the current detection information.
Operation Steps:
1.
Select “Print” --- “Print Detection Record”; only after
detection functions (such as “Read Fault Codes”,
“Read Data Streams” and “Read Version Informati-
on”) have been enabled can this button be available;
or else, this button will be gray, which means una-
vailable;
2.
Fill in the corresponding blanks with the information
relevant to detection record; any blank marked with
“*”must be filled in, otherwise it is impossible to
print the detection record;
3.
Just select a print mode (either “Print” or “Print to
File”) to start printing.
7.5.1.2 Print Diagnostic Report
It is used to print the diagnostic report.
Operation Steps:
1.
Select “Print” --- “Print Diagnosis”; only after any of
the functions (i.e. “Fault Codes”, “Data Streams” and
“Version Information”) has been enabled can this
button be available; or else, this button will be gray,
which means unavailable;
2.
Select the diagnosis report(s) to be printed; it is
available to simultaneously print the diagnosis re-
ports on Version Information, Fault Codes and Data
Streams, provided that such three functions have
been enabled; if merely the “Read Version Informati-
on” function has been enabled, then the Fault Codes
and the Data Streams will be gray and cannot be
printed;
3.
Fill in the corresponding blanks with the information
relevant to diagnosis report; any blank marked with
“*”must be filled in, otherwise it is impossible to
print the diagnosis report;
4.
Just select a print mode (either “Print” or “Print to
File”) to start printing.
7.5.1.� Print to File
5.
It is used to print the desired content into an image
file in the “JPG” format.
Operation Steps:
1.
Select “Print to File” to get a pop-up dialogue box
for saving;
2.
Select the save path for the file;
3.
Enter the file name;
4.
Finally, click the “Save” button.
7.5.2
�mage Browse
It provides convenience for you to browse images.
Operation Steps:
¶
Double click the image to proceed to the “Image
Browse” function.
i
Toolbar Description:
Identifica-
tion
Description
The “Zoom In” button, used to zoom in the
browsed image;
The “Zoom out” button, used to zoom out the
browsed image;
The “Restore” button, used to restore the browsed
image to its original size;
The “Clockwise Rotate” button, used to rotate the
browsed image clockwise;
The “Counterclockwise rotate” button, used to ro-
tate the browsed image counterclockwise;
The “Close” button, used to close the image brow-
se tool.
7.5.�
Screenshot
It is used to capture the information of current window,
and the system will save the information as a file in
the “JPG” format under the default path (e.g. KT700/
SCREENSHOTS/); such a file cannot be modified, and
its name is automatically assigned by the system.
Operation Steps:
1.
Click the
(“Screenshot”) button from the left
top of screen; the system automatically saves the
file, and the interface displays the save path and the
name of this file.
2.
Click the “OK” button to quit the function “Screens-
hot”.
Summary of Contents for KT400
Page 1: ...VCI User Manual ...
Page 2: ......