Bosch Automotive Diagnostics Equipment (Shenzhen) Limited
24 | ��� | Service and Maintenance
en
7.5.4
Help
It is the on-line help function for the VCI, telling you
how to operate the VCI and how to implement the diag-
nosis. It works as an independent interface.
Operation Steps:
1.
Click the
(“Help”) button on the main inter-
face of system to proceed to the “Help” interface;
2.
You may view the desired content through the navi-
gation bar on the right;
3.
You may also use the
(“Search”) button to enter
the keyword and view the desired content.
i
For easy and fast search, you may place the items
frequently viewed into the “Favorite” folder; you may
print the content displayed in the current page.
7.5.5
Using small keyboard
7.6
Service Help
This function, specially provided by Bosch Automotive
Diagnostics Equipment (Shenzhen) Limited, is the help
information on vehicle service and can be used as a
reference for the service personnel.
8.
Service and Maintenance
8.1
�leaning
It is not recommended to clean the KT400 host with the
corrosive detergent or any coarse cloth; only the soft
cloth and neutral detergent can be used.
8.2
Maintenance
R
Place the KT400 in the flat and dry place with mo-
derate temperature and less dust when the KT400 is
not used;
R
Don’t place the KT400 in the place with direct sun-
light or close to the heating device;
R
Don’t place the KT400 near the stove or in the place
where will be easily subjected to smoke erosion,
water entry, and oil splashing;
R
Don’t disassemble the host without permission;
R
If the vehicle test is not performed for a long time,
please periodically run the KT400 host to avoid being
affected with damp.
8.2.1
Maintenance of touch screen
R
Do not click the screen before cursor appears when
calibrating the touch screen;
R
Use the touch pen at back of the instrument to touch
the screen, rather than nail or other sharp (hard)
objects; otherwise the screen will be damaged;
R
Do not place anything on the touch screen to avo-
id misalignment and damaged units due to heavy
pressure;
R
Do not expose the touch screen in direct sunlight or
ultraviolet radiation light to increase its life time;
R
Keep the product away from electrical equipment
generating electromagnetic wave interference to
ensure correct oscillography;
R
The LCD surface will absorb dust due to static. It is
recommended to use special cleanser and cloth for
LCD to clean it. Do not use other chemical cleanser
or figure to clean the touch screen.
8.2.2
SD card maintenance
R
Do not pull the SD card out in operation. Pull it out
after the instrument is switched off;
R
When using SD card for online upgrade, do not pull
it out when the reader operates, otherwise, the
data will be lost. The SD card shall be pulled out as
following: Click to open “my computer” on Windows
desktop; right-click USB disk menu and select “pull
out” from the popup menu, then pull out the SD
card.
Summary of Contents for KT400
Page 1: ...VCI User Manual ...
Page 2: ......