Cleaning and servicing
en
47
Defrosting in the freezer com-
partment
As the frozen food must not start
thawing, the freezer compartment
does not defrost automatically. A
layer of hoarfrost in the freezer com-
partment impairs refrigeration of the
frozen food and increases power
consumption.
Defrosting the freezer compartment
Regularly defrost the freezer com-
partment.
1.
Switch on Super freezing approx.
four hours before defrosting.
→
"Switching on Super freezing",
This means that the food reaches
very low temperatures and it can
be stored for longer at room tem-
perature.
2.
Remove the frozen food and tem-
porarily place it in a cool location.
Place ice packs (if available) on
the frozen food.
3.
4.
Disconnect the appliance from the
power supply.
Unplug the appliance from the
mains or switch off the circuit
breaker in the fuse box.
5.
To accelerate the defrosting pro-
cess, place a pan of hot water on
a trivet in the freezer compartment.
6.
Wipe up the condensation water
with a soft cloth or sponge.
7.
Rub the freezer compartment dry
with a soft, dry cloth.
8.
Electrically connect the appliance.
9.
10.
"Put the frozen food in the appli-
ance." →
Cleaning and servicing
Cleaning and servicing
Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
Customer Service must clean inac-
cessible points. Cleaning by cus-
tomer service can give rise to costs.
Preparing the appliance for
cleaning
Find out how to prepare your appli-
ance for cleaning.
1.
2.
Disconnect the appliance from the
power supply.
Unplug the appliance from the
mains or switch off the circuit
breaker in the fuse box.
3.
Take out all of the food and store it
in a cool location.
Place ice packs (if available) onto
the food.
4.
If there is a layer of hoarfrost, allow
this to defrost.
5.
"Remove all fittings from the appli-
ance." →
Cleaning the appliance
Clean the appliance as specified to
ensure that it is not damaged by in-
correct cleaning or unsuitable clean-
ing products.
WARNING
Risk of electric shock!
¡
An ingress of moisture can cause
an electric shock.
▶
Do not use steam- or high-pres-
sure cleaners to clean the appli-
ance.
Summary of Contents for KUL Series
