10
en | System Overview
VARI-directional array
2018.06 | V1.3 |
Installation manual
Bosch Security Systems B.V.
3.1
What’s in the packaging
In addition to the line array itself, each VARI-B and VARI-BH base unit is shipped with the
following items:
Qty Item
Use
1
Imporant Safety Instructions
1
Right-angled IEC connector (C13, rewireable)
AC mains input
2
Cable tie, nylon
Mains cable strain relief
4
Phoenix connectors, 3-pole, 3.81 mm-pitch
Inputs (line level), failure relay,
control voltage
2
Phoenix connectors, 5-pole, 3.81 mm-pitch
RS-485 in/out
2
Phoenix connectors, 2-pole, 5.08 mm-pitch
Inputs (100 V line)
1
Phoenix connector, 2-pole, 7.62 mm-pitch
DC power input
2
Hinged mounting bracket
Wall mounting
4
30 mm hex-headed screws with washers and
wall plugs
Fixings for wall mounting
1
Grille removal tool
Removal of front protective grille
In addition to the line array itself, each VARI-E extension unit is shipped with the following
items:
Qty Item
Use
2
M5 x 12 mm hex-headed bolts
Secure Extension to base unit
1
Hinged mounting bracket
Wall mounting
2
30 mm hex-headed screws with washers and
wall plugs
Fixings for wall mounting
The VARI-CS Configuration Set comprises the following items:
Qty Item
Use
1
USB to RS-485 interface, with manual
Hardware interface
1
USB cable, 1.8 m
(USB Type A to USB Type B)
PC-to-interface cable
1
RS-485 cable, 5 m
(5-pin Phoenix to 5-pin Phoenix)
Interface-to-VARI cable