Installation and wiring
Installing the speaker
For safety, ensure the mounting surface supports more than the weight of the speaker. Use
only industry-accepted fasteners and mounting methods when mounting the wall bracket.
Consult an expert if you are unsure.
!
Caution!
It is the installer's responsibility to determine and use the proper mounting hardware for
the wall construction type.
Disregarding this caution could result in damage to the product and personal injuries may
occur.
Installing the wall bracket vertically
To
install the wall bracket vertically
, do the following:
1.
Drill a
hole
into the
wall
for the wire.
The size of the hole is dependent on the size of the wire used.
2.
Push the
wire
thru the hole.
3.
Adjust the
wall bracket
until the bubble is level.
4.
Install
four mounting screws
to secure the wall bracket to the wall.
5.
Connect the
wires
to wall bracket audio connectors, as shown in the wiring section.
4
4.1
10
en | Installation and wiring
Premium Cabinet Loudspeakers
2017.08 | 01 | F.01U.345.357
Installation manual
Bosch Security Systems B.V.
Summary of Contents for LB20-PC15-4D
Page 1: ...Premium Cabinet Loudspeakers en Installation manual ...
Page 2: ......
