Surface mount speakers
Wattage tap
Prior to wiring your system, select the mode of operation (100V/70V/4 ohm or 8 ohm stereo)
by setting the slider switch to the appropriate setting. Select taps using the rotary switch on
the subwoofer input panel. The power taps are 100 W, 50 W, 25 W, and 12.5 W at 70.7V and
100V, as well as a 4 ohm transformer bypass setting. A guide on the input panel shows which
switch positions to use for the power settings at 70V and 100V.
Figure 5.2: LB6-SW100-D Wattage Tap
5.2
5.2.1
28
en | Wiring
Compact Sound Speaker System
2015.12 | 07 |
Installation Manual
Bosch Security Systems B.V.
