Video | LTC 0630 Series Dinion2X Day/Night Camera
The LTC 0630 Dinion2X Day/Night camera is a high-
performance, surveillance camera. It uses a 1/2-inch CCD
sensor and incorporates advanced digital signal
processing for outstanding picture performance.
The advanced image processing enhances sensitivity; the
improved XF-Dynamic engine extends the dynamic range.
This unique combination provides a sharper, more
detailed image with outstanding accuracy in color
reproduction even under harsh lighting conditions.
The Dinion2X camera is easy to install and ready to use,
and offers the best solution for demanding scene
conditions. The day/night feature ensures the highest
image quality possible at any time. Depending on the
available light the camera will automatically switch from
color to monochrome.
All Dinion cameras are supplied ready to operate. Simply
attach the lens, connect video and then power. Six
distinct pre-programmed operational modes are stored in
the camera. Recall the mode that suits your application
for optimized performance.
The camera automatically detects the lens type. The lens
wizard ensures accurate back-focusing for perfectly sharp
pictures at all times. For especially challenging situations
where fine tuning or special settings are required, the
camera parameters can be individually set using the
control buttons on the side of the camera and an On-
screen Display (OSD).
Functions
XF-Dynamic and Image Processing
Improved XF-Dynamic technology and highly accurate
digital signal processing optimally captures the detail in
both bright highlights and deep shadows simultaneously.
The Dinion2X maximizes the information visible in the
picture even with strong backlighting.
SmartBLC
Turn on SmartBLC to automatically compensate the image
without the need for complicated set-up.
Detail Enhancement
Features such as Autoblack and Sharpness further
improve the details in a scene, pixel by pixel.
Day/Night Mode
The day/night mode provides enhanced night viewing by
increasing the IR sensitivity. The IR filter can switch from
color to monochrome automatically by either sensing the
illumination level or via the alarm input. The filter can be
switched manually via the alarm input, through the camera
menu or via the Bilinx coaxial control interface. An internal
through-the-lens IR detector enhances the monochrome
mode stability, as it prevents reverting to the color mode
when IR illumination is dominant. IR contrast is also
measured and used to handle reflected IR light in outdoor
scenes.
LTC 0630 Series Dinion2X Day/Night
Camera
▶
Advanced Image Processing Technology
▶
Improved XF-Dynamic engine with SmartBLC
▶
Detail enhancement
▶
True Day/Night performance with switchable filter
▶
1/2-inch CCD sensor
www.boschsecurity.com
