2 | LTC 13xx and LTC 14xx Series FlexiDome Fixed Dome Cameras
Installation/Configuration Notes
115 (4.5")
77 (3.0")
35 (1.4")
63 (2.5")
Dimensions
Parts Included
Quantity
Components
1
LTC 13xx or LTC 14xx Series FlexiDome Fixed Dome Camera
with lens
Technical Specifications
Electrical
Models:
FlexiDome I
Monochrome
Color
Lens type
LTC 1311
LTC 1411
2.1 mm F/2.0
LTC 1312
LTC 1412
3 mm F/2.0
LTC 1313
LTC 1413
6 mm F/2.0
FlexiDome II
LTC 1321
LTC 1421
2.1 mm F/2.0
LTC 1322
LTC 1422
3 mm F/2.0
LTC 1323
LTC 1423
6 mm F/2.0
Model No.
Voltage Range
Mono/Color Sys-
tems
Monochrome
LTC 131x/10, 132x/10
12 to 28 VAC or VDC
CCIR
LTC 131x/20, 132x/20
12 to 28 VAC or VDC
EIA
Color
LTC 141x/10, 142x/10
12 to 28 VAC or VDC
PAL
LTC 141x/20, 142x/20
12 to 28 VAC or VDC
NTSC
Power is 2 W for all models.
Imager: Interline transfer CCD; 1/4-inch image format.
FlexiDome I
FlexiDome II
Active Picture Elements:
PAL/CCIR
500 H x 582 V
752 H x 582 V
NTSC/EIA
510 H x 492 V
768 H x 492 V
Horizontal Resolution:
Color
330 TVL
470 TVL
Monochrome
380 TVL
570 TVL
Signal to noise ratio (Min.
AGC)
>46 dB
>48 dB
AGC
18 dB
20 dB
Sensitivity (3200 K):
Usable Picture (50IRE) Full Video
Monochrome
Scene illumination
0.5 lux
(0.05 fc)
2.5 lux (0.25 fc)
Color
Scene illumination
4.5 lux
(0.45 fc)
22 lux (2.2 fc)
F/2 lens, 89.9% scene reflectance.
Electronic Shutter
PAL/CCIR Models: 1/50 to 1/100,000 sec.
NTSC/EIA Models: 1/60 to 1/100,000 sec.
White Balance (Color Models Only)
Continuous Tracking (ATW): 2500 K to 9000 K.
White Balance Store (AWB): 2500 K to 9000 K.
Video Output 1.0 Vpp, 75 ohm.
Aperture Correction Horizontal and vertical.
Synchronization
Line-lock (when powered by AC): Synchronizes camera to power line zero
crossing for roll-free vertical interval switching. Vertical phase delay can be
externally adjusted (continuously) to allow vertical synchronization in mul-
tiphase power installations.
Controls
Line-Lock Selectable On/Off.
Phase Adjust Range 330°
White balance ATW or AWB (color models only)
Backlight Compensation On/Off.
Connectors
Video Out BNC.
Power Terminal block, power supply terminals are isolated from video out-
put BNC.
