Robert Bosch Hausgeräte GmbH
5
Operation
Before operating the appliance and
accessories for the first time, clean
thoroughly; see “Cleaning and servicing”.
Preparation
Place the base unit on a smooth, clean
surface.
Pull cord out of the cord store to the
required length.
Bowl with accessories/tools
Universal blade (10)
for cutting and chopping.
Kneading hook (11)
for stirring and kneading dough and
for mixing in ingredients which are
not to be cut.
Stirrer (12)
for cream, beaten egg white and
light dough. Not suitable for solid
ingredients.
Before using, fit stirrer.
Insert stirrer into drive housing and lock
into position (Fig.
-5b).
Fig.
Attach the bowl (arrow on bowl on dot on
the appliance) and rotate as far as
possible in a clockwise direction.
Inserting universal blade/kneading hook:
– Press the drive shaft into the tool holder
until it locks into position.
– Insert tool holder into the bowl.
– Place universal blade/kneading hook
into the tool holder and let go.
Inserting stirrer:
– Insert drive shaft into the bowl.
– Attach stirrer with a slight rotation
to the drive shaft.
Add ingredients.
Attach lid (match arrow on lid on dot on
bowl) and rotate in a clockwise direction.
Lid lug must be located fully in the slot
in the bowl handle.
Insert pusher and pusher insert.
Insert the mains plug.
Set the rotary switch to the desired
setting.
To add more ingredients, set the rotary
switch to 0/off.
Remove the pusher and add ingredients
through the feed tube.
Add liquids through the pusher.
Pusher insert can be used as
a measuring jug.
en
Warning!
Use only the rotary switch (1) to switch
the appliance on or off.
Switching off the appliance by opening the lid
(6, 20b, 21b) will damage the appliance.
Important!
Bowl (5), lid/jug of the universal cutter (20)
and blender jug (21a) are not suitable for use
in the microwave!
Risk of injury from
the rotating tools!
While the appliance is operating, never place
fingers in the mixing bowl.
Always use the pusher (7) for adding ingre-
dients. After switching off, the drive
continues running for a short time. Change
tools only when the drive is at a standstill.
Warning!
When working with the bowl, the appliance
cannot be switched on until the bowl has
been attached and the lid has been attached
and screwed on tight.
Risk of injury from sharp blades!
Grip the universal blade by the edge
of the plastic handle only.
When not in use, always store the universal
blade in the blade guard.
Warning!
Add ingredients to be processed always after
the tool has been inserted.
