Robert Bosch Hausgeräte GmbH
9
Blending
Warning!
To operate the blender, the blender lid must
be attached and screwed on tightly.
Fig.
Attach the blender jug (match arrow
on the jug on the dot on the appliance)
and rotate as far as possible in a
clockwise direction.
Add ingredients.
Maximum capacity, liquid = 1.5 litres
(frothing or hot liquids max. 0.4 litres).
Optimal processing capacity, solids =
80 g.
Attach lid and rotate in a clockwise
direction. Lid lug must be located fully
in the slot in the blender handle.
Set the rotary switch to the desired
setting.
To add more ingredients, set the rotary
switch to 0/off.
Remove the lid and add ingredients
or
remove the funnel and gradually add
solid ingredients through the refill
opening
or
pour liquid ingredients through the funnel.
After blending
Set the rotary switch to 0/off.
Remove mains plug.
Rotate the blender in an anti-clockwise
direction and remove.
Rotate the lid in an anti-clockwise
direction and remove.
Tip: It is recommended to clean the blender
immediatley after use, see “Cleaning and
servicing”.
Universal cutter
for cutting smaller quantities of
meat, hard cheese, onions, parsley,
garlic, fruit and vegetables.
It is not permitted to cut coffee beans, pepper
corns, sugar, poppy seeds and horseradish.
Fig.
Attach the jug (match arrow on the jug
on the dot on the appliance) and rotate as
far as possible in a clockwise direction.
Add food, which is to be cut, in the jug.
Attach lid and rotate in a clockwise
direction. Lid lug must be located fully
in the slot in the jug.
Turn rotary switch to setting M and hold.
The longer the appliance remains
switched on, the finer the ingredients are
cut.
In the case of herbs the required cutting
result can be achieved very quickly after
switching the appliance on. A brief “tap”
on setting M may be adequate.
After using the appliance
Release rotary switch.
Remove mains plug.
Rotate universal cutter in a anti-clockwise
direction and remove.
Turn universal cutter over, the chopped
food falls into the lid.
Rotate jug anti-clockwise and remove.
Remove the rest of the chopped food
from the jug using a suitable implement
(e.g. spoon).
Clean all parts, see “Cleaning and
servicing”.
en
Risk of injury from sharp blades/
rotating drive!
Never reach into the jug of the universal
cutter! Remove the chopped food using
a suitable implement (e.g. spoon).
Do not remove universal cutter until the drive
is at a standstill.
The universal cutter will not work until the lid
has been screwed on tightly.