User Manual | Mitchell Diagnostics | Scan Tool | 20 | en
©Mitchell International, Inc.
581624 | REV. B | 06.2017 | APDMD032018
Freeze Frame
Mode 2 views data captured when a fault occurred.
Freeze frame shows a data stream snapshot that
was automatically recorded by the ECU when one or
more DTCs occurred.
Generic OBDII
READINESS MODE 1
DATA STREAM MODE 1
FREEZE FRAME MODE 2
O2 SENSORS MODE 5
SPECIAL TESTS MODE 8
NON-CONTINUOUS TESTS
MODE 6
DTCs MODES 3, 4, 7, A
VEHICLE INFO MODE 9
Menu
Share
Distance MIL Active
Mode 2 Freeze Frames
miles
16003
Distance Since DTC Clear
miles
13722
Evaporative Emissions
System Vapor Pressure
inH2O
6.35
Catalyst Temperature
Bank 1 Sensor 2
Catalyst Temperature
Bank 2 Sensor 1
Catalyst Temperature
Bank 1 Sensor 1
7220
41
1741
°F
°F
°F
ss02721
Freeze frame records each sensor’s current
information at the time a DTC sets. This feature
could be used when diagnosing an intermittent
condition that requires certain conditions are met
before the fault is active.
NOTE: DTCs are not always stored in Mode 2 freeze frame.
Freeze Frame Button Definitions
Menu Button
Tapping the Menu button displays a
pop-up link that takes the user to more
buttons.
View Help
Selecting View Help will open an online
user manual.
Use Metric Units
Selecting Metric Units will switch from
English/Standard Units to Metric Units.
Use English/Standard Units
Selecting English/Standard Units will
switch from Metric Units to English/Stan-
dard Units.
Take Screen Capture
Selecting Take Screen Capture will save a
copy of the current open screen.
DTCs Modes
Modes 3, 4, 7, and A read and clear DTCs.
Generic OBDII
READINESS MODE 1
DATA STREAM MODE 1
FREEZE FRAME MODE 2
O2 SENSORS MODE 5
SPECIAL TESTS MODE 8
NON-CONTINUOUS TESTS
MODE 6
DTCs MODES 3, 4, 7, A
VEHICLE INFO MODE 9
Menu
TAP ‘DTCs MODES 3, 4, 7, A’ TO REOPEN
ss02722
1. Select DTCs Modes from the Generic OBDII screen.
Menu
Diagnostic Trouble Codes for Global OBDII
B0001
Driver Frontal Stage 1
Deployment Control (Subfault)
Driver Frontal Stage 2
Deployment Control (Subfault)
Driver Frontal Stage 3
Deployment Control (Subfault)
B0002
B0003
Share
Read
Clear
Save
B0001
Driver Frontal Stage 1
Deployment Control (Subfault)
Driver Frontal Stage 3
B0003
Driver Frontal Stage 2
Deployment Control (Subfault)
B0002
OBDII CURRENT CODES
OBDII PENDING CODES
ss02723
2. Use the buttons and follow the prompts on the
screen.
OBDII DTC Nomenclature
P-0102
Fault (00-99)
1 - Fuel & Air Metering
2 - Fuel & Air Metering (Injector Circuit)
3 - Ignition Systems or Misfire
4 - Auxilary Emission Control
5 - Vehicle Speed Control and
Idle Control System
6 - Computer Output Circuit
7 - Transmission
8 - Transmission
0 - SAE
1 - MFG
B - Body
C - Chassis
P - Power Train
U - Network
ss01521
Example: P0102 Mass Air Flow Performance