User Manual | Mitchell Diagnostics | Scan Tool | 23 | en
©Mitchell International, Inc.
581624 | REV. B | 06.2017 | APDMD032018
When available, this selection will automatically take
the user to the special test screen where the test
group menu will be displayed. Make a selection to
enter the test, then follow the on-screen prompts.
Mode 8 will not be supported on all vehicles. If you
wish to run an EVAP test on a vehicle that does not
support Mode 8, enter vehicle specific mode and
refer to the Special Tests section on how to run a
special test.
Special Tests Button Definitions
Menu Button
Tapping the Menu button displays a
pop-up link that takes the user to more
buttons.
View Help
Selecting View Help will open an online
user manual.
Use Metric Units
Selecting Metric Units will switch from
English/Standard Units to Metric Units.
Use English/Standard Units
Selecting English/Standard Units will
switch from Metric Units to English/
Standard Units.
Take Screen Capture
Selecting Take Screen Capture will save a
copy of the current open screen.
Vehicle Info
Mode 9 views Vehicle Identification Numbers (VINs),
calibration ID(s), and verification number(s).
Generic OBDII
READINESS MODE 1
DATA STREAM MODE 1
FREEZE FRAME MODE 2
O2 SENSORS MODE 5
SPECIAL TESTS MODE 8
NON-CONTINUOUS TESTS
MODE 6
DTCs MODES 3, 4, 7, A
VEHICLE INFO MODE 9
Menu
Vehicle Information (Mode 9)
Make sure the key is ON and the Engine is OFF.
OK
Cancel
ss02729
1. Select Vehicle Info from the Generic OBDII screen.
2. Follow the prompts on the screen.
Generic OBDII
READINESS MODE 1
DATA STREAM MODE 1
FREEZE FRAME MODE 2
O2 SENSORS MODE 5
SPECIAL TESTS MODE 8
NON-CONTINUOUS TESTS
MODE 6
DTCs MODES 3, 4, 7, A
VEHICLE INFO MODE 9
Menu
Vehicle Information (Mode 9)
Vehicle identification Number
Controller
ENGINE
1FTPW14V28FC54321
Vehicle Identification Number
Calibration identification Number
Controller
ENGINE
BOSCHA1037366956
Calibration Identification Number
ss02730
The 17 digit VIN provides information on the vehicle
including year of manufacture, engine and possibly
transmission type, vehicle body style, and color.
Mode 9 is not supported on older vehicles, so a visual
check of the VIN through the windshield or on the
door sticker would be required to obtain that VIN.
Mode 9 is used on the tool to AutoID the vehicle
and for calibration verification to see if a newer
calibration is available for re-flashing the ECU.
Vehicle Info Button Definitions
Menu Button
Tapping the Menu button displays a
pop-up link that takes the user to more
buttons.
View Help
Selecting View Help will open an online
user manual.
Use Metric Units
Selecting Metric Units will switch from
English/Standard Units to Metric Units.
Use English/Standard Units
Selecting English/Standard Units will
switch from Metric Units to English/Stan-
dard Units.
Take Screen Capture
Selecting Take Screen Capture will save a
copy of the current open screen.