2 | MIC Series 412TI Thermal Camera
Thermal image in glow bow mode / Thermal image in iron
bow mode
Functions
Separate optical and thermal cameras
Switch between optical camera and thermal imager at the
press of a single button.
Brushless motor technology
Whisper‑quiet operation and smooth control is provided
through use of ultra-reliable brushless motors.
Robust design
Machined from solid aluminum, the MIC Series 412
thermal camera ensures corrosion protection by using two
different processes; first an Alocrom 1200 coating, then a
robust, powder paint coating. Alocrom 1200 is a chromate
conversion coating of aluminum, used in the aerospace
and defense industries where a protective layer is
required to improve corrosion resistance. Sealed with 'O'-
rings, the device can operate submerged up to 1 meter
(3.3 feet) underwater by virtue of its design and
construction.
Note
The thermal camera will show no detail if
submerged.
Integrated long-life silicone wiper and heater
Thanks to its integrated wiper and heater, the MIC
Series 412 thermal camera is able to capture the highest
possible quality image all year round, regardless of the
weather.
Host of mounting and viewing options
Faultless operation, either upright or inverted, gives the
user a host of mounting and viewing possibilities
Easy to use
Provides the same easy to use functionality of all MIC
series cameras, including the same connection cables,
brackets, control equipment, and non-IR power supply
units.
Certifications and Approvals
Electromagnetic Com-
patibility (EMC)
Complies with FCC part 15, ICES-003, and CE
regulations including EN50130-4,
EN61000-3-2:2006, EN61000-3-3:1995, and
EN55022:2006 inc AL:2007
Safety
Complies with CE regulations, UL, EN, and IEC
standards 60950-1 & 22
Weatherproofing
IP68 (1m submersion for 24 hrs)
Technical Specifications
Camera Module (optical)
Image sensor
1/4‑inch EXview CCD
Horizontal resolution
(WDR) 36x module, 530 TVL NTSC/PAL typical
Filter
Automatic mechanical IR cut filter
Focus system
Auto or manual
Iris
Auto or manual with slow shutter integration
modes
Synchronization
Internal / External (V‑Lock)
Signal-to-Noise ratio
(SNR)
50 dB or more
Back Light Compensa-
tion (BLC)
On/Off
White balance
Automatic
Automatic Gain Control
(AGC)
-3 to -28 dB, 2 dB steps
Aperture control
16 Steps
36x optical zoom module
Lens
F=3.4 mm (WIDE) to 122.4 mm (TELE), F1.6 to
F4.5
Zoom
36x optical (12x digital)
Angle of view
57.8º (WIDE end) to 1.7º (TELE end)
Minimum illumination
1.4 lux (1/60 s NTSC, 1/50 s PAL, typical, F1.6,
50IRE)
0.1 lux (1/4 s NTSC, 1/3 s PAL, typical, F1.6,
50IRE)
ICR-ON mode: 0.01 lux (1/4 s NTSC, 1/3 s PAL)
Shutter speed
1/4 to 1/10,000s (20 steps) NTSC, 1/3 to
1/10,000s (20 steps) PAL
Camera Module (thermal)
Lens
50 mm
Image sensor
Focal Plane Array (FPA), un-cooled Vanadium Ox-
ide microbolometer
7.5 Hz NTSC, 8.3 Hz PAL
Picture elements
324(H) x 256(V)
Spatial resolution
0.760 mrad with 50 mm lens
Field of view
14°(H) x 11°(V) with 50 mm lens
Focus
Factory-set at infinity focus
Spectral response
7.5 to 13.5 μm
