(7) and radial compensation (8). They have a suction port (S) and a pressure
connection (P).
5.2.2
Coupling and Bellhousing
The pump and the motor are connected together with the coupling and the
bellhousing. Additionally, an optional pump foot is fastened on the bellhous‐
ing or the motor-pump unit is directly connected with the system.
Depending from the size of the motor-pump unit, different couplings and bell‐
housings are available.
5.2.3
Servomotor MSK
For motor-pump units, MSK motors with smooth shaft are used.
5.2.4
Fan Unit LEM
The fan units LEM are used for increased performance of the servo motors.
5.2.5
Pump Foot
The optional pump foot is fastened on the bellhousing of the motor-pump unit
and serves to assemble the motor-pump unit in the system.
5.3
Product Identification
5.3.1
Motor-Pump Unit MPAS1
Type Plate
The motor-pump unit can be identified by the type plate. The following exam‐
ple shows the type plate on a motor-pump unit MPAS1:
1
Part number
2
Serial number
3
Date of production
4
Type designation
Fig. 5-3:
Type plate motor-pump unit
Type Code
The type code serves for general information of products. The de‐
livery capacity of single combinations must be determined over
the ordering system.
Bosch Rexroth AG
DOK-SYTROX-MPAS1******-IT01-EN-P
Rexroth Sytronix SvP 70xx Motor-Pump Unit MPAS1
28/83
About this Product
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
