3
General Notes on Material Damage and Product
Damage
Material damage due to improper handling,
pollution or cleaning!
NOTICE
Improper Handling
●
The motor-pump-unit may only be used according to the section "Appro‐
priate Use".
●
Do not strike at function-relevant surfaces (e.g. fastening surfaces) and
mounting parts (e.g. connections).
●
Mixing of hydraulic fluids
Every kind of mixing of hydraulic fluids of different manufacturers or dif‐
ferent types of the same manufacturer is not permitted.
Premature wear and malfunctions due to pollution by liquids and foreign bod‐
ies.
●
During assembly pay attention to cleanliness to prevent foreign bodies,
e.g. beads of sweat or cuttings attain the hydraulic line and therewith
lead to wear and malfunctions on the motor-pump-unit.
●
Ensure clean and chipless connections, hydraulic lines and mounting
parts (e.g. measuring devices).
●
Use residue-free industrial wipes to remove lubricants and other heavy
contamination.
●
Ensure before start-up that all hydraulical and mechanical connections
are connected.
●
Do cleaning procedures on the motor-pump-unit only with locked hy‐
draulic connections.
●
When filling, filter the hydraulic fluid with a suitable filter system to mini‐
mize the sediment pollution and water in the system.
Improper cleaning
●
Lock all apertures with suitable protective caps or protective screwed
connections to prevent penetration of cleaning agents.
●
Check fit seat of all sealings and fasteners of electrical connections to
prevent penetration of cleaning agents.
●
Do not use aggressive cleaning agents. Clean the motor-pump-unit with
a suitable cleaning fluid.
●
Any use of a high-pressure cleaner is improper.
Operation with to little hydraulic fluid.
●
The motor-pump-unit can be damaged or destroyed. Heed the specifica‐
tions of the machine manufacturer about "Control of hydraulic fluid" and
the specified corrective actions to the test result.
Leakage or spillage of hydraulic fluid.
●
Use oil binder agent to bind left hydraulic fluid.
●
Place a catch tank under the motor-pump-unit when filling or discharg‐
ing hydraulic fluid.
●
Please observe the details in the safety data sheet of hydraulic fluid and
the regulations of the machine manufacturer.
DOK-SYTROX-MPAS1******-IT01-EN-P
Rexroth Sytronix SvP 70xx Motor-Pump Unit MPAS1
Bosch Rexroth AG
23/83
General Notes on Material Damage and Product Damage
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
