16
en
Customised setting options
In function selection mode, button
B
and
the indicator [ мой режим ] (my mode) are
permanently lit. Button
G
flashes. “00:00”
is shown in the display.
1�
Press button
F
once.
“00:00” flashes in the display.
2�
Keep pressing button
F
until the desired
preparation time is displayed.
3�
Press button
C
once.
“0000” flashes in the display.
4�
Keep pressing button
C
until the desired
preparation temperature is displayed.
5�
Press button
G
to start with the
selected settings.
The appliance heats up the pan until the
target temperature is reached.
Once the target temperature is reached,
the lines go out and the preparation time
is shown in the display. The preparation
process starts automatically.
рецепт 1 / рецепт 2 (recipe 1 /
recipe 2) – saving personal
preparation programmes
Depending on the model
X
“Model over-
view and technical data” see page 20
Personal preparation programmes with
customised time and temperature can
be saved under the memory locations
[ рецепт 1 ] (recipe 1) and [ рецепт 2 ]
(recipe 2).
1�
In function selection mode, press
button
D
once.
The LED [ рецепт 1 ] (recipe 1) lights up.
The pre-configured preparation time is
shown in the display.
Note:
if you have not previously saved any
personal preparation programmes, “00:00”
is shown in the display.
2�
Press button
F
once.
The display flashes. LED 1 (preparation
step 1) lights up in the control panel.
3�
Keep pressing button
F
until the desired
preparation time is displayed.
When button
F
is briefly pressed, the prepa
-
ration time is increased by 1 minute. When
button
F
is pressed for a longer period, the
preparation time is increased by 10 minutes.
The time increases up to the pre-configured
maximum value and then returns to the
pre-configured minimum value.
4�
Press button
C
once.
The pre-configured preparation temperature
is shown in the display.
Note:
if you have not previously saved any
personal preparation programmes, “0000” is
shown in the display.
5�
Keep pressing button
C
until the desired
preparation temperature is displayed.
6�
Press and hold button
G
(>2 seconds)
to save the set values.
In order to program other preparation steps,
repeat points 2 to 6. Up to 3 preparation
steps can be programmed.
The saved preparation programme
[ рецепт 1 ] (recipe 1) can be selected as
usual via function selection mode (see the
sections on selecting and starting a prepa-
ration programme).
Note:
to save a second personal prepa-
ration programme under [ рецепт 2 ]
(recipe 2), use the same process as
described above for [ рецепт 1 ] (recipe 1).
To delete a personal preparation
programme, perform the following steps:
1�
In function selection mode, press
button
D
once.
The LED [ рецепт 1 ] (recipe 1) lights up.
The saved preparation time is shown in the
display.
2�
Press button
F
once.
The display flashes. LED 1 (preparation
step 1) lights up in the control panel.
3�
Press and hold button
H
(>2 seconds).
The settings for [ рецепт 1 ] (recipe 1) are
deleted.
Note:
to delete the second personal prepa-
ration programme [ рецепт 2 ] (recipe 2),
use the same process as described above
for [ рецепт 1 ] (recipe 1).
MUC_2-4_RU_8001013355.indb 16
10.08.2015 12:44:53
