10
en
Cleaning and servicing
■ Add ingredients.
Maximum amount of liquid = 1.25 litres;
maximum amount of frothing or hot
liquids = 0.5 litres;
Optimal processing capacity –
solids = 50-100 g;
■ Attach the cover and turn anti-clockwise
all the way into the blender handle. The
cover must be locked in position.
■ Set the rotary switch to the desired
setting.
Adding more ingredients
Fig.
J
-8:
■ Switch off the appliance with the rotary
switch.
■ Remove the lid and add ingredients
or
■ remove the funnel and gradually add solid
ingredients through the refill opening
or
■ pour liquid ingredients through the funnel.
After using the appliance
■ Switch off the appliance with the rotary
switch.
■ Rotate the blender in a clockwise
direction and remove.
Tip:
It is recommended to clean the blender
immediately after use.
Cleaning and servicing
Attention!
Do not use abrasive cleaning agents.
Surfaces may be damaged.
Cleaning the base unit
W
Danger of electric shock!
Never immerse the base unit in water or
place under running water. Do not use a
steam cleaner.
■ Remove mains plug.
■ Wipe the base unit and drive cover with
a damp cloth. If required, use a little
detergent.
■ Then dry the base unit.
Cleaning the bowl and tools
The bowl and tools are dishwasher-
proof. Do not wedge plastic parts in the
dishwasher, as they could be permanently
deformed during the washing process!
Cleaning the continuous-feed
shredder
All parts of the continuous-feed shredder
are dishwasher-proof.
Tip:
To remove the red film after processing
e.g. carrots, pour a little cooking oil on a
cloth and rub the film off the continuous-
feed shredder (not the cutting discs). Then
rinse the continuous-feed shredder.
Cleaning the blender
W
Risk of injury from sharp blades!
Do not touch blender blades with bare
hands.
The blender jug, lid and funnel are
dishwasher-proof.
Tip:
After processing liquids, it is often
sufficient to clean the blender without
removing it from the appliance. Pour a little
water and washing-up liquid into the attached
blender. Switch on the blender for several
seconds (setting
M
). Pour out the water and
rinse out the blender with clear water.
Important information
If required, clean accessories bag. Follow
care instructions in the bag.
Storage
W
Risk of injury!
When the appliance is not in use, pull out
the mains plug.
Fig.
K
:
■ Store tools and cutting discs in the
accessories bag.
■ Keep accessories bag in the bowl.
■ To store in the original packaging, see
Fig.
L
.
