en
Familiarising yourself with your appliance
42
Display
Status
The illuminated ring
does not light up and
processing cannot
start.
¡
The appliance has
no power supply.
¡
There is a fault
with the appliance.
The illuminated ring
flashes and pro-
cessing cannot start
or continue.
¡
A safety system
has been activ-
ated.
¡
There is a fault
with the appliance.
Tip:
You can find further information
here:
→
Control panel
You can find an overview of the con-
trol panel here.
→ Fig.
1
Reset button
2
Scales button
3
Display
4
Symbol Weight in pounds
5
Symbol Weight in grammes
6
Symbol Time in minutes and seconds
Function buttons
You can use the function buttons to
select additional functions or config-
ure settings. To make a selection,
touch the relevant symbols with your
finger.
Symbol
Function
Switch scales on and off.
¡
Reset scales.
¡
Reset timer.
Note:
Press the buttons with your fin-
gers without wearing rubber/oven
gloves. Do not operate buttons with
objects, e.g. a wooden spoon.
Display
The display shows values and mes-
sages about the operating status.
Note:
The display will switch off auto-
matically if the appliance is not oper-
ated for a given period of time. To re-
activate the display, press a button or
start processing.
Swivel arm
The swivel arm can be adjusted and
fixed in different positions.
If the release button is pressed, the
swivel arm can be moved to the re-
quired position.
→
"Moving the swivel arm", Page 45
Note:
The swivel arm features the
EasyArm Lift function. This function
supports upwards movement of the
swivel arm.
Swivel arm positions
You can find an overview of the posi-
tions of the swivel arm here.
Position
Use
Position 1 Swivel arm is closed.
¡
Process ingredients with tools.
¡
Use accessory on main drive,
e.g. Ice maker.
¡
Use accessory on drive 2, e.g.
Continuous-feed shredder
Position 2 Swivel arm is open.
¡
Insert or remove bowl.
¡
Insert or remove tool.
¡
Add the ingredients to the
bowl.
