Basic operation
en
35
The bowl must be positioned
straight and firm on the base unit.
Removing bowl
▶
Lift and remove the bowl.
→ Fig.
Inserting tools
1.
Select the tool required.
→
2.
Press the tool into the main drive
until it engages.
→ Fig.
3.
To insert the kneading hook:
‒
Insert the kneading hook with
the protective cap fitted in the
main drive.
‒
Turn the protective cap until the
kneading hook engages fully.
The protective cap must cover
the main drive completely.
Removing tools
▶
Pull the tool completely out of the
drive.
→ Fig.
Attaching bowl lid
Requirements
¡
The required tool is used here.
¡
The bowl has been inserted.
¡
The swivel arm is closed.
1.
Press the release button, raise the
swivel arm slightly and hold in
place.
→ Fig.
2.
Lift the lid slightly at the front, slide
fully onto the bowl and set down.
→ Fig.
The filling shaft must face towards
the front.
3.
Push the swivel arm down until it
engages.
→ Fig.
Removing bowl lid
1.
Press the release button, raise the
swivel arm slightly and hold in
place.
2.
Lift the lid slightly at the front and
pull it out towards the front.
3.
Push the swivel arm up until it en-
gages.
Processing
You can find out everything you need
to know about processing food here.
Recommended speeds
Observe the recommended speeds
for optimum results.
Setting
Use
1-2
Stir in and mix ingredients.
3
Knead heavy dough, e.g. yeast
dough.
5-7
Beat and stir ingredients, e.g.
whipped cream.
Briefly beat and stirr ingredients at
maximum speed.
Processing ingredients with tools
WARNING
Risk of injury!
Rotating drives, tools or accessory
parts may cause injury.
▶
Keep hands, hair, clothing and
utensils away from rotating parts.
▶
Only attach and remove tools and
accessories once the drive has
stopped and you have unplugged
the appliance.
Summary of Contents for MUMS2 Series
