Troubleshooting
en
39
Troubleshooting
Troubleshooting
Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out by trained specialist
staff.
▶
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.
Malfunctions
Fault
Cause
troubleshooting
The appliance is not work-
ing.
The mains plug of the power
cord is not plugged in.
▶
Connect the appliance to the power
supply.
The circuit breaker is faulty.
▶
Check the circuit breaker in the
fuse box.
There has been a power cut.
▶
Check whether the lighting in your
kitchen or other appliances are
working.
Appliance does not start pro-
cessing.
Rotary switch is set incor-
rectly.
▶
Set the rotary switch to
be-
fore processing.
Appliance does not start pro-
cessing or switches off dur-
ing processing.
Swivel arm is not engaged
properly or has become de-
tached.
1.
Set the rotary switch to
.
2.
Move the swivel arm until it en-
gages correctly.
The swivel arm cannot be
opened or closed because
the tool is jammed in the
bowl.
Drive is not in the parked po-
sition after a safety system
has stopped processing or
the power supply has been
interrupted.
1.
Set the rotary switch to
.
2.
Eliminate the problem that caused
the appliance to stop.
3.
When the swivel arm is open, re-
move the tool and close the swivel
arm.
4.
Set the rotary switch briefly to and
then back to
.
a
The drive remains on for a short
time until the parked position is
reached.
Summary of Contents for MUMS2 Series
