7
en
Operation
The built-in predetermined breaking point
protects the drive of the appliance. If an
overload occurs, the drive shaft of the
continuous-feed shredder breaks. However,
the drive shaft can easily be replaced. A
new disc holder with drive shaft is available
from customer service. Spare parts with
a predetermined breaking point are not
a component of our warranty obligations.
Such spare parts can be purchased from
customer service (order no. 091027).
Operation
W
Risk of injury!
Do not grip the sharp blades or edges of the
cutting discs. Take hold of cutting discs by
the edge only. Before attaching / removing
the continuous-feed shredder, wait until the
drive has come to a standstill and pull out
the mains plug. Keep fingers clear of the
filling shaft, add more ingredients with the
pusher.
Warning!
The continuous-feed shredder must be
completely assembled before use. Never
assemble the continuous-feed shredder on
the base unit. Operate the continuous-feed
shredder in the indicated operating position
only. If you are not working with the original
bowl of the MUM8... / MUMXL.., the tool
drive cover must be attached.
Important information
In these instructions for use the recom-
mended reference values for the operating
speed refer to appliances with a 7-setting
rotary switch.
For appliances with a 4-step rotary switch
the guide values can be found in the
following table:
7 settings: 1
2
3
4
5
6
7
4 settings: 1
–
2
–
3
–
4
For some models:
Professional Supercut reversible
disc / reversible slicing disc –
coarse / fine
for slicing fruit and vegetables.
■
Process at setting 5.
Designation on the reversible slicing disc:
“Grob” for the coarse cutting side
“Fein” for the fine cutting side
Warning!
The professional Supercut reversible disc /
reversible slicing disc is not suitable for
slicing hard cheese, bread, bread rolls or
chocolate. Slice boiled, waxy potatoes only
when they are cold.
Shredding reversible disc –
coarse / fine
for shredding vegetables, fruit and cheese,
except for hard cheese (e.g. Parmesan).
■
Process at setting 5 or 7.
Designation on the reversible shredding
disc:
“2” for the coarse shredding side
“4” for the fine shredding side
Warning!
The reversible shredding disc is not suitable
for shredding nuts. Shred soft cheese with
the coarse side only (at setting 7).
Grating disc – medium-fine
for grating raw potatoes, hard
cheese (e.g. Parmesan), cooled chocolate
and nuts.
■
Process at setting 7.
Warning!
The inserted blades must be face up. The
grating disc is not suitable for grating soft
cheese and cheese slices.
Working with the continuous-feed
shredder
Figure
D
:
■
Press release button and move
multi-function arm to position
1
.
■
Cover unused drives with drive
covers.
