1 4
| Operating instructions |
OBD 1110
|
en
|
OBD 1110
| Operating instructions |
15
en
577383 REV A | 10.2015
Bosch Automotive Service Solutions
577383 REV A | 10.2015
Bosch Automotive Service Solutions
Limited Warranty
This warranty is expressly lim-
ited to original retail buyers
of Bosch electronic diagnostic
tools (“Units”) .
Bosch Units are warranted against
defects in materials and work-
manship for one year (12 months)
from date of delivery . This war-
ranty does not cover any Unit that
has been abused, altered, used
for a purpose other than that for
which it was intended, or used
in a manner inconsistent with
instructions regarding use . The
sole and exclusive remedy for
any Unit found to be defective is
repair or replacement, the option
of Bosch . In no event shall Bosch
be liable for any direct, indirect,
special, incidental or consequen-
tial damages (including lost profit)
whether based on warranty,
contract, tort or any other legal
theory . The existence of a defect
shall be determined by Bosch
in accordance with procedures
established by Bosch . No one is
authorized to make any statement
or representation altering the
terms of this warranty .
Disclaimer
The above warranty is in lieu of
any other warranty, express or
implied, including any warranty
of merchantability or fitness for a
particular purpose .
Software
Unit software is proprietary,
confidential information protected
under copyright law . Users have
no right in or title to Unit software
other than a limited right of use
revocable by Bosch . Unit soft-
ware may not be transferred or
disclosed without written consent
of Bosch . Unit software may not
be copied except in ordinary
backup procedures .
Technical Support /
Repair Service
If you have any questions on
the operation of the product,
please call 1300 783 031 or
email automotive .
techsupport@au .bosch .com .
Please contact Technical Support
for troubleshooting and service
options prior to sending any unit
for repair .
For repair, return the unit to point
of purchase .
PID
PID description
VEH SPEED
Vehicle Speed
VGT_A_ACT,
B_ACT
Variable Geometry Turbo A
Position, Turbo B
VGT_A_CMD,
B_CMD
Commanded Variable Geome-
try Turbo A Position, Turbo B
VGT_A_STAT,
B_STAT
Variable Geometry Turbo A
Control Status, Turbo B
VPWR
Control Module Voltage
WG_A_ACT, B_
ACT
Wastegate A Position, B
Position
WG_A_CMD,
B_CMD
Commanded Wastegate A
Control, B Control
TQ_DD
Driver's demand engine per-
cent torque
TQ_ACT
Actual engine percent torque
TQ_MAX1,
MAX2, MAX3,
MAX4, MAX5
Engine percent torque at
idle point 1, 2, 3, 4, 5
TQ_REF
Engine reference torque
VGT_A_ACT
Variable geometry turbo A
position
VGT_A_CMD
Commanded variable geome-
try turbo A position
VGT_A_STAT
Variable geometry turbo A con-
trol status
VGT_B_ACT
Variable geometry turbo B
position
VGT_B_CMD
Commanded variable geome-
try turbo B position
VGT_B_STAT
Variable geometry turbo B con-
trol status
VPWR
Control module voltage
WG_A_ACT
Wastegate A position
WG_A_CMD
Commanded wastegate A
control
WG_B_ACT
Wastegate B position
WG_B_CMD
Commanded wastegate B
control
