22
| English
1 609 929 L54 | (18.2.08)
Bosch Power Tools
Assembly
f
Before any work on the machine itself, pull
the mains plug.
Mounting the Spray Gun and the Electri-
cal Unit (see figures A1
–
A2)
Connecting the Electrical Unit with the Spray
Gun
–
Insert the spray gun
9
onto the electrical unit
1
until it can be heard to engage.
Removing the Electrical Unit
–
Press and hold the two red SDS release but-
tons
4
and pull the spray gun
9
out of the
electrical unit.
Operation
Preparing for Operation
f
Spraying on the sides of water bodies
(lakes, rivers, etc.) or neighbouring surfac-
es in the direct catchment area is not per-
mitted.
When purchasing paint, varnish and spray mate-
rial, pay attention to their environmental com-
patibility.
Preparing the Spray Surface
Note:
Cover off the vicinity of the spray surface
thoroughly and generously.
The spray mist contaminates the environment.
When spraying in enclosures, surfaces not cov-
ered can become contaminated.
The spray surface must be clean, dry and
grease-free.
–
Roughen smooth surfaces and then remove
the sanding dust.
Diluting Spray Material
f
When diluting, pay attention that the spray
material and the diluting agent correspond.
When using a faulty diluting agent, lumps can
develop that can lead to clogging of the spray
gun.
For spray material that needs to be diluted, pro-
ceed as follows:
–
Take the measuring cup
22
.
–
Stir the spray material thoroughly.
–
Fill a sufficient quantity of spray material into
the spray-material container
11
. (siehe “Fill-
ing in Spray Material”, Seite 23)
–
Dilute the spray material by 10 % with paint
thinner. Examples:
–
Stir the spray material thoroughly.
–
Carry out a test-spray run on a test surface.
(see “Spraying”, page 23)
When the spraying pattern is perfect, start the
spray job.
or
When the spraying result is not satisfactory or
when no paint comes out, please continue as
described under “Correction of Malfunctions”
on page 25.
Spray material
Recommended
dilution
Wood preservatives, strip-
pers, oils, finishes
undiluted
Disinfectants,
plant protectants
undiluted
Solvent- or water-dilutable
paints, primers,
automobile spray paint,
thick-coat finishes
At least 10 %
diluted
Amount of spray
material [ml]
200
300 400 500
Paint thinner [ml]
20
30
40
50
OBJ_BUCH-670-001.book Page 22 Monday, February 18, 2008 2:16 PM
